This is a Sportsman Fogger dry kit where there is a fuel/nitrous nozzles per each intake port, then they all plumb back to the fuel/nitrous solenoid.

I have forged pistons and rods so I can handle the extra power (plus ability to use bigger injectors). And plus with the I4 there is tons of room to have the plumbing done right behind the injector entrance in the lower intake. (basically between the head and the upper intake manifold).

Price: 616.07 from carparts.com. or even better...

NOS-05030FI Sportsman Fogger Kit, 4-cyl fuel injected applications $501.69 from summit!

More info at www.nosnitrous.com/HiOctn...ogger.html

_________________
Vinnie Lima
vlima@csc.com
AIM: Kiku888
1997 Chrysler Sebring "Silver XTC"
I4 420a w/ HRC Stage 2.45 w/ FMIC
14.7@97 mph@6psi
Proud member of the
ASOG BoOsT JuNkIe Crew

Damn i hate how you cant edit the post after 60 mins you posted.

Anyways, carparts will BEAT the price from summit (501$)...PLUS discount 10% off of it....talk about a kit for $451 bucks!!!!!!

Cmon guys, give me some input in this. This is what i have built into my motor:


1997 Chrysler Sebring LX - I4 420A engine, race-prepped cylinder head with custom ported ports and runners, bullfrog .376 lift, .237 duration intake/exhaust camshafts, Mopar valvesprings, oversized 3.5" JE Pistons 10:1 forged steel pistons, Crower billet connecting rods, American Automotive rod bearings, ARP rod bolts, ARP cylinder head studs, ARP bottom end bolts, Mopar MLS headgasket, Extreme Motorsports ajustable pressure regulator and 190lph fuel pump, bullfrog 55mm throttle body with matching butterfly, AEM Cam gears, TPS mod, extrude hone'd lower/upper intake runners - final compression of 10:1.

_________________
Vinnie Lima
vlima@csc.com
AIM: Kiku888
1997 Chrysler Sebring "Silver XTC"
I4 420a w/ HRC Stage 2.45 w/ FMIC
14.7@97 mph@6psi
Proud member of the
ASOG BoOsT JuNkIe Crew

LAST EDITED ON 06-Jun-01 AT 06:36 PM (PST)

Its the kit everyone longs for (but nobody wants to install). Get it. Its direct port but not dry however (you already have upgraded fuel pump/regulator, you wont need larger injectors unless you still plan on throwing a turbo on there too).


Stan2gnt
Stan2va@aol.com
95 Talon 420A-Turbo
Former and future nitrous user

:farfrommugen:
Yes I still own a 2gnt.
Damn right I've been here longer than U
klassic_liven@yahoo.com

I've heard issues about how these direct port kits may puddle fuel/nitrous because when its spraying, it is not in sync with the valve so it still sprays when the intake valve is closed? Is this such a big issue?

Also is there a danger of the fuel solenoid failing and then only spraying nitrous? or if the fuel solenoid fails the nitrous shuts off and vice versa?

Thanks gain for the info.

_________________
Vinnie Lima
vlima@csc.com
AIM: Kiku888
1997 Chrysler Sebring "Silver XTC"
I4 420a w/ HRC Stage 2.45 w/ FMIC
14.7@97 mph@6psi
Proud member of the
ASOG BoOsT JuNkIe Crew

>I've heard issues about how these
>direct port kits may puddle
>fuel/nitrous because when its spraying,
>it is not in sync
>with the valve so it
>still sprays when the intake
>valve is closed? Is this
>such a big issue?

Interesting theory but I have NEVER heard that one before. Wouldn't the same apply to any wet kit (single fogger too) as they spray constant fuel also. There certainly isn't a puddling issue with any direct port set up.

>Also is there a danger of
>the fuel solenoid failing and
>then only spraying nitrous? or
>if the fuel solenoid fails
>the nitrous shuts off and
>vice versa?

Yeah there's a danger. If the fuel solinoid fails during a run your screwed. No way around it on wet kit. No such device exist (how would it determine a mechanical failure and react. if it were an electrical failure once power it lost it will snap shut anyway).



Stan2gnt
Stan2va@aol.com
95 Talon 420A-Turbo
Former and future nitrous user

:farfrommugen:
Yes I still own a 2gnt.
Damn right I've been here longer than U
klassic_liven@yahoo.com

Heh Stan seems like we are following eachother back and forth here and asog.net I appreciate your help. I plan on making my purchase early next week.

Here's another thought..

is it possible to monitor the nitrous/fuel pressure on the s/s line between the solenoid and the nozzle?

One could rig something up that if the pressure drops below a certain level on the fuel s/s line, it would immediately shut the power off from the nitrous solenoid....

_________________
Vinnie Lima
vlima@csc.com
AIM: Kiku888
1997 Chrysler Sebring "Silver XTC"
I4 420a w/ HRC Stage 2.45 w/ FMIC
14.7@97 mph@6psi
Proud member of the
ASOG BoOsT JuNkIe Crew

LAST EDITED ON 08-Jun-01 AT 04:08 PM (PST)

I was surfing around again and noticed the "high octane" forum over there. I really like the concept as you can go directly to hardcore mods.

I've seen quite a few direct port set ups with a fuel pressure and nitrous pressure gauge mounted at the assembly under the hood. but if you want(electrical) gauges in the car where you can see them why not use a regular electrical fuel prussure gauge with the sender tee'd off the test port. Thats the same place fuel is directed to your nitrous fuel line. Autometer has a nitrous pressure gauge for a pillar mounting.

I would assume you could put either at any suitable place you could put in a tee


Stan2gnt
Stan2va@aol.com
95 Talon 420A-Turbo
Former and future nitrous user

:farfrommugen:
Yes I still own a 2gnt.
Damn right I've been here longer than U
klassic_liven@yahoo.com

Yeah but what i mean by having a fuel pressure gauge is between the solenoid and the nozzle so that if fuel prssure drops from the fuel solenoid failing.

Thanks and its good to have some knowledgeable people visit the asog octane forum =)

v.

_________________
Vinnie Lima
vlima@csc.com
AIM: Kiku888
1997 Chrysler Sebring "Silver XTC"
I4 420a w/ HRC Stage 2.45 w/ FMIC
14.7@97 mph@6psi
Proud member of the
ASOG BoOsT JuNkIe Crew

fit a tee to the output of the solinoid and run the sender on the top of it and the line from the other end of the tee. The dual solinoid is a good idea (a little paranoid but one that would work).


Stan2gnt
Stan2va@aol.com
95 Talon 420A-Turbo
Former and future nitrous user

:farfrommugen:
Yes I still own a 2gnt.
Damn right I've been here longer than U
klassic_liven@yahoo.com

Nice that carparts will beat the price, but I have always had problems with thier shipping taking forever. Good luck, I would love to have that setup (no one wanted to install here )

Michelle
96 Eclipse Base Model
Best 14.6@93 w/60 shot

1997 Eclipse RS
1991 Eclipse GSX
1995 Eagle Talon TSi AWD
1989 Dodge Daytona 2.5 turbo
(tinker car)
1996 Eclipse base model RIP