Ive got a pressure gauge on the A pillar, but im not sure where the best place to run it thru the firewall is. Is there a factory hole big enough, or do i need to drill one. If so, wheres the best place to drill, for easy access in the engine bay? thanks.

tim

USED TO HAVE...Everything you wish you had, and then some...

You are somebody special Tim, you matter! - from the admins (but nobody likes you, because your username is just like that other guy's, and you whine a lot)

at the base of the steering colmn it's all rubber, you can slit a hold in there and it'll pop out, guess where? the ENGINE...woohoo. i connected my pressure gauge is on the apillar and runs to a T connection thing right before the purge which is right before the silnoid. but yeh, use the rubber around the steering colmn...really easy

-bryan
'98 rst

You can run the Nitrous line through the steering column boot or beside the grommet in the passenger side. The line is too big to run through the grommet so you'll have to go beside it. Use a 'T' fitting or gauge adapter fitting right before your Nitrous or purge solenoid. Do you finally have the Nitrous kit installed? What shot are you using?

its not in yet but will be very soon, im waitng on a few other things first which should all be done in the next few weeks.
i will be running the beginners 50 shot for now, i have 75 but i want to get broke in slowly. i may buy a 60 shot to move up before the 75.


thanks for the info on where to run the line.

USED TO HAVE...Everything you wish you had, and then some...

You are somebody special Tim, you matter! - from the admins (but nobody likes you, because your username is just like that other guy's, and you whine a lot)

hehe... after the first bottle with a 50 shot, you'll want the 75 shot! good luck, man