if anyone can tell me where is the best place to tap fuel for a wet kit, i would greatly appreciate it. I cut my rubber section just before the rail and t-tapped it. If there is a better place please let me know.

thanx

> if anyone can tell me where is the best place to tap fuel
>for a wet kit, i would greatly appreciate it. I cut my
>rubber section just before the rail and t-tapped it. If
>there is a better place please let me know.
>
> thanx

the test port

i need to know how to tap from the test port. what parts to buy and where to get them.
thanx

> i need to know how to tap from the test port. what parts to
>buy and where to get them.
> thanx

all u need to do is remove the cap on the test port, take out the valve, (i think is the schrader valve), ull need a special tool for that,, then screw the line on and connect it to the fuel solenoid

Which is better T ing it to the fuel line or off the test port?

i just wonder if tapping the line there is cutting my fuel flow down and starving the injectors. otherwise it works fine

Thats what I was worried about. I know we could just upgrade the fuel pump.

you shouldnt need a fuel upgrade unless u boost