Is there a fitting to hook up to a 4an line to shoot the nitrous out? I'm trying to make it shoot out where the windshield washer fluid comes out of the hood. I'm going to be running (2) 4an lines and need some kind of fitting that i can drill into the little black things on the hood.

venomtalon@aol.com

Performance Mods: Custom CAI, Jeep 60mm TB, Ported Intake Manifold with Jeep TB match, 5 angle valve job, Head milled .020, Regrind Cams, PT Lifters and Rockers, AEM Cam Gears, OBX Wires, NGK Plugs, AFX UDP, OBX Header, OBX

Check here:
http://www.nosnitrous.com/HiOctn/ProdLine/Products/NOS/index.html

I came up with my own set up. Its going to cost about $75 just for the lines and fittings. but it should be sweet.

I'll post some pics when I get it all set up.

I'm going to run a "T" fitting form the solenoid and then (2) 2.5 foot stainless lines to 4an-1/4npt (90 deg) fittings and then to this fitting I found at lowes(1/4npt female-little 1/8 line).

venomtalon@aol.com

Performance Mods: Custom CAI, Jeep 60mm TB, Ported Intake Manifold with Jeep TB match, 5 angle valve job, Head milled .020, Regrind Cams, PT Lifters and Rockers, AEM Cam Gears, OBX Wires, NGK Plugs, AFX UDP, OBX Header, OBX

cool... post some pics when you're done!