ok I got my used kit today and the 14ft braided line has a kink in it..will this cause a problem? Is there just a rubber hose on the inside..Its not completely flat more like dented from being shipped all rolled up so it proberely got bent or slighly crushed...anyway to tell it will leak? TIA
AFX/UDP,AEM,AF/X 55mm TB,50 shot of NOS,Glenn's short shifter,17" tantrum,prokit KYB AGX,JL stealthbox sony headunit,audiobahn amp,M3 style mirrors,Blue leds,yellow fogs,reverse ind,w
#41595, "RE: kink in nitrous hose?" In response to Reply # 1
I would replace the hose. N2O is at like 900 to 1100 psi, I would definately not risk it. A new hose probably runs about 50 bucks, maybe a little more, I have never replaced on my self but better safe that sorry.
______________________________________________________________ 1999 Civic SI, Boosted and built, 12.67@112.
Gone but not forgotten..... 1998 Eagle Talon ESI, built and boosted 14.2@98 1992 Eagle Talon TSI AWD12.91@104 1992 Honda Hatch swapped and sprayed14.0@108