I need the wiring diagram for the vcn-1000 for our cars. I need to know what wires to splice into. I'm in the middle of the install. I need help ASAP.

venomtalon@aol.com

Performance Mods: Custom CAI, Jeep 60mm TB, Ported Intake Manifold with Jeep TB match, 5 angle valve job, Head milled .020, Regrind Cams, PT Lifters and Rockers, AEM Cam Gears, OBX Wires, NGK Plugs, AFX UDP, OBX Header, OBX

Which wires are you talking about? The injector wires? TPS wire? O2 wire? Let me know..

Steve
Black 97 GS
First time at track 16.231 @ 86.11 (Intake & Exhaust/ 17" rims)
Best time- 14.154 @ 101.22
W/O N2O- 15.916 @ 88.98

Magnacor

I Need all 3. Injectors, TPS, and Oxygen sensor, and what wire you taped the GREEN wire into (Injector, Its for the power on or something)?

venomtalon@aol.com

Performance Mods: Custom CAI, Jeep 60mm TB, Ported Intake Manifold with Jeep TB match, 5 angle valve job, Head milled .020, Regrind Cams, PT Lifters and Rockers, AEM Cam Gears, OBX Wires, NGK Plugs, AFX UDP, OBX Header, OBX

TPS wire (Brown) Injector wires (Off-white with stripes 4 different colors) The power injector wire goes to the #1 injector (green). O2 sensor is white or black can't remember. There is only one though. There might be two white, if there is, it's the black one then. Let me know if need more info.

Steve
Black 97 GS
First time at track 16.231 @ 86.11 (Intake & Exhaust/ 17" rims)
Best time- 14.154 @ 101.22
W/O N2O- 15.916 @ 88.98

Magnacor