Where should I run the nitrous line from the bottle? I want to tie it to my fuel lines. I dont know where to go when I reach the firewall. I spoke to the guy at Venom and he said not to cross over electrical wires because of condensation on the lines and shorting stuff out. I have the VCN-1000 kit. I am going to mount my solenoid right next to the ecu. thanks

- No Purchase Neccesary. Details Inside.

i ran my line from the bottle throught the rubber grommet where the back seat is under the car, next to the hard lines (i zipp tied the line to them) and up through to the engine compartment

When you got to the engine compartment, where did you route the line? thanks

- No Purchase Neccesary. Details Inside.

I did the same thing (rubber gromet (sp?)). After that it is a maze under there...

Steve
Black 97 GS
First time at track 16.231 @ 86.11 (Intake & Exhaust/ 17" rims)
Best time- 14.154 @ 101.22
W/O N2O- 15.916 @ 88.98

Magnacor

I ran my line up on the firewall, then behind the windsheild wiper bottle and down by the battery, then around the ecu, I put my braket where you did downazzdsm. I put my nozzel in the rubber peice where my bypass valve used to be. It's right by the battery. Will that little silicon hose peice freeze and slide off the intake when I use my n2o?

- No Purchase Neccesary. Details Inside.

No It won't slide off, mine is near the same place, looks like your coming along pretty good. Make sure to strap that line down tight, you don't want that thing whiping around in your engine bay ( Eclipse Cowboy ):7

Steve
Black 97 GS
First time at track 16.231 @ 86.11 (Intake & Exhaust/ 17" rims)
Best time- 14.154 @ 101.22
W/O N2O- 15.916 @ 88.98

Magnacor

I tied it to a couple of the wire loom things. those ties aren't big enough for me to tie it to the intake. I can't wait to mount the bottle and get it filled. It's gonna be awesome. Thanks for all your help guys.

- No Purchase Neccesary. Details Inside.