i looked in the search section before and there were no posts that answered my question. i would like to know how i hook up a nos dry kit to the fuel line. Ive been lookin at the pics and they have been helpful and now im stuck at hooking up the system to the fuel line i went and got a valve stem puller and it didnt get the line off of the fuel rail. I have a 95 talon. Does anyone have suggestions or have pics on how the system is hooked up to the fuel line.

dry kits do not inject fuel... just nitrous, hence the term "dry". wet kits inject fuel along with nitrous.

Evan B
97 GS
Stamford CT
EvMan2345@aol.com

Evan B
02 Explorer
97 GS- sold
90 GSX-sold
Stamford CT
EvMan2345@aol.com

with a dry kit you have to 1) you use a fuel pressure regulator, which goes on the test port which is located on the fuel rail. (which by the way doesnt fit on the test port) and 2) you have disconnect the vaccum line from the rail and hook it up to the tee, and then take one of the hose from the kit and reconnect it to the rail from one of the outlets from the tee.

hey, did you ever figure this out? I'm doing it right now.

1990 Eclipse GS-T