ok the fpr that i got with my kit, i got it used, did not come complete, missin disks, i don't know which ones but that one that i have is the 6:1. So can i use the FPR that i got for my eight injector set-up in the mean time, the Aeromotive that Corbin suggest, instead of the one that came with my star since that one is complete.
i am allready built up so i will be runnin like 15PSI but thats not untill i get my boost controller.
later
"Z"

If you bought the aeromotive one, then you can't do that. That is a 1:1 regulator and will not supply enough fuel under boost.

Matt
1995 Eclipse GS
2.0L, S16g Turbo, 8 Injectors, 26psi

1998 Eclipse GSX
2.3L Stroker, AEM EMS Converted to Speed Density, FP3065 Turbo, 35psi , and so on...

so then what do i have to get to make the FPR i got with my kit work? where can i buy more disks? the dude who i bought the kit from said i need a 12:1 disk but never sent it to me, the bitch?
later
"Z"

Call up Vortech directly, and you can get the extra rings/disks through them. You can check out their webstite www.vortechsuperchargers.com Like Matt said, you CANNOT use the Aeromotvie FPR other than the 8 injector setup. It will NOT rise the fuel pressure enough under boost. It only rises one fuel psi, per pound of boost.

13.5 @108 MPH-2.2 60ft(stupid FWD!)
S16G @ 18 PSI/FMIC/Running on MegaSquirt II (Now with sequential
fuel injection)
My webpage: http://eclipsed4evr.home.comcast.net
-1998 Mitsubishi Eclipse RS-T- "Toy"
-1992 Plymouth Laser Turbo AWD(SOLD)
-2000 Honda CR-V(daily)