im tryin to find the thread that had the different part numbers to the accells. i have looked on hrc web site but the part numbers dont coincide with where i can get them at cost. any help woukld be great.
looking for the rc 440 equivalent on up to about 550. thanks
soon to be finishe
take care ben

http://www.imagestation.com/album/pictures.html?id=2134181717&mode=slideshow
t3/t4 setup, je pistone, eagle rods,aem cam gears, crane cams, port and polished head w swirl polished valves, avcr, autometer gauges to be installed, kaminari widebody kit shaved rain seals, door handles, tail lights, relocated gas cap, double humped hood, house of kolors candybrandywine 20in weld evo wheels, air ride, custom fiberglass work (dash interior) more to come just not enough time

Ford Motorsport Injector Color Code

Orange=19lb
Light Blue=24lb
Red=30lb
Silver or Dark Blue=36lb


More Ford injector part numbers:

Flow, Part no., Color, Application
14 lb/hr, F1ZE-B4C, Gray, 1.9 - 3.8L
19 lb/hr, FOTE-D1A, Yellow/Orange, 4.6L SOHC
19 lb/hr, FOTE-D5B, Yellow/Black, 5.0L, 4.6L SOHC
24 lb/hr, F2LE-B2A, Lt. Blue 4.6L DOHC
25.3 lb/hr, F3DE-A2B, Blue/Green 3.0L Flex Fuel
30 lb/hr, F1SE-E1A, Red, 3.8L SC

42lb = The part number on them reads: XL3V-A5A , and they have green top.

##This is from a previous post that I saved. Here is another post##

The part number for 42 lbs. is M-9593-F302
The part number for 30 lbs. is M-9593-B302
That is straight off of Ford Racing's website.

http://www.gnttype.org/techarea/fuelsystem/injflow.html

The above site has some good info, the 36 lbs. Bosch injectors which Ford uses for the SVO FI Kits have part number 0-280-150-967 according to the site. Good luck.

97 RS(PTE SC-61, Built Long Block, Electromotive Tec 3)It's Here!

thanks for all your help brotha

http://www.imagestation.com/album/pictures.html?id=2134181717&mode=slideshow
t3/t4 setup, je pistone, eagle rods,aem cam gears, crane cams, port and polished head w swirl polished valves, avcr, autometer gauges to be installed, kaminari widebody kit shaved rain seals, door handles, tail lights, relocated gas cap, double humped hood, house of kolors candybrandywine 20in weld evo wheels, air ride, custom fiberglass work (dash interior) more to come just not enough time