Well for some reason, i am set on getting the Wiseco pistons for my rebuild, but i'm having a hard time finding them in .020 overbore for our engines. Does anyone know the best place to get them from? JE's aren't a prob to find, but i want the Wesico's, so dont try and sway my mind! I have looked at Blackdog Motor sports, and raceengineering.com and no luck.. Thanks for any input fellas..

13.5 @108 MPH-2.2 60ft(stupid FWD!)
S16G @ 18 PSI/FMIC/Running on MegaSquirt II (Now with sequential
fuel injection)
My webpage: http://eclipsed4evr.home.comcast.net
-1998 Mitsubishi Eclipse RS-T- "Toy"
-1992 Plymouth Laser Turbo AWD(SOLD)
-2000 Honda CR-V(daily)

We have bought two different sets of 8.5:1 .020 overbore pistons from RaceEngineering.... i KNOW beyond a shadow of a doubt they carry them, they just may be out of stock.

www.TeamKLR.com
1997 Silver RS
12.3@118mph,20psi, race gas(drag radials)
Wiseco 10.5 Pistons
Eagle Rods
T3/T4 Turbo
Custom FMIC
Greddy Exhaust
440's

cool, thanks man. Yeah i checked out the website, and found the 10.5:1 comp ones, but no low comp ones. I did email them, so waiting to hear from them...

13.5 @108 MPH-2.2 60ft(stupid FWD!)
S16G @ 18 PSI/FMIC/Running on MegaSquirt II (Now with sequential
fuel injection)
My webpage: http://eclipsed4evr.home.comcast.net
-1998 Mitsubishi Eclipse RS-T- "Toy"
-1992 Plymouth Laser Turbo AWD(SOLD)
-2000 Honda CR-V(daily)

Here's the link for blackdog:
http://www.blackdogmotorsports.com/pistons.html

They don't have the 8.5:1 listed but they carry them. Give them a phone call.

http://www.rpmxtreme.com

Ive never done business with them so I can't vouch for them. I just saw an advertisement saying they carry them.

www.modernperformance.com has them in stock for the neon (same thing) they shipp real fast good service, black dog will have them i garentee raceeng will or can get them fast...

You can have it cheap, fast or good. Pick any two.

If you want it cheap and fast, it's not going to be good.
If you want it cheap and good, it's not going to be fast.
If you want it good and fast, it's not going to be cheap.

RaceEng should have em in stock. i can vouch for their customer service as far as we have been concerned, top notch.

www.TeamKLR.com
1997 Silver RS
12.3@118mph,20psi, race gas(drag radials)
Wiseco 10.5 Pistons
Eagle Rods
T3/T4 Turbo
Custom FMIC
Greddy Exhaust
440's

thanks for all the help guys! Race engineering has them, they said that its their "Extreme Duty" line of pistons, made by Wiseco. For 8.5:1 , .020 over, lookin like 369.00 for pistons, and 72.00 for rings. Not a bad price at all. I have heard lots of great comments about race eng, so i will prob go with them. I still may make a few phone calls, but i would rather pay a little more and get better service if thats the case. Been there, done that

13.5 @108 MPH-2.2 60ft(stupid FWD!)
S16G @ 18 PSI/FMIC/Running on MegaSquirt II (Now with sequential
fuel injection)
My webpage: http://eclipsed4evr.home.comcast.net
-1998 Mitsubishi Eclipse RS-T- "Toy"
-1992 Plymouth Laser Turbo AWD(SOLD)
-2000 Honda CR-V(daily)

whats the direct website to race engin
page for the 10.5 compression Wiseco .020 over?

Michael 99gs
HRC Stage 2
Stage 3 process begins gathering parts for rebuild

http://www.dreamwater.net/purplebeast

http://www.raceeng.com/showItems.asp?cat=IMP&id=101323310120544333454777112323447843223432366545511120113220123201223567034322322323434344322303444323442344454343266&subcat=PS&Supplier=RACE


Part# WI-I540P88

88mm/10.5:1 compression, $369 for a set

Race is one of our oldest/biggest customers. We make pistons for them practically daily!

1999 GS

1991 Mustang GT