#37912, "RE: Attn: Star turbo kit owners!" In response to Reply # 2
Collente is right, I spiked to 10 psi on the dyno and put down 200 HP, on stock bottom end, while oil sprayed outta my breather and my compression in #1 and #4 went below 90. That was end of 2001 and now Im scared it will happen again so I dont hit full boost much anymore especially now that its cold and likes to spike. Be careful. Run 8 on dyno IMO. -Dave
2009 Corolla S - waiting until 2012 for my next toy! *SOLD* 1992 3000GT VR4 - pearl white and 45,6xx miles! *SOLD* 2007 Subaru Legacy GT sedan *SOLD* 95 Mitsubishi 3000GT VR4 - BPU *SOLD* 97 Eclipse GS Star Stage 2
#37938, "RE: Attn: Star turbo kit owners!" In response to Reply # 5
ddo you mean 225? you usually get about 11 HP for each PSI that you run. they are also talking a difference on WHP and Crank HP.... there will be a difference because WHP is what its putting down to the wheels and Crank is how much HP being put to the crank hope that helps?
Boca Raton, Florida 95 Eclipse GS- sold 99 Eclipse GSX- 386awhp 98 Eclipse GS- sold 92 Prelude
#37939, "RE: Attn: Star turbo kit owners!" In response to Reply # 6 Jan-24-03 09:28 AM by fasterGS
hahn claims 250-275 on their stageII kit. Keep in mind this is crank Hp, and also keep in mind this was on a very tuned car. Even at 275, 20% drivetrain loss is 220 wheel HP. At 250 CHP its putting 200 to the wheels, I think that is realistic.
#37970, "RE: Attn: Star turbo kit owners!" In response to Reply # 2
>I would highly reccomend not running 9-10 PSI on the stock >bottom end. It can be done, but I dont think that anyone has >ran 9-10 psi and not blown. > > >Nick >97RS >OBX Headers, OBX CAI, OBX Cat-Back, 8%tint,Walbro High flow >pump, Accell wires/plugs, Custom interior, Upper Strut Bar, >Kenwood/pioneer stereo. >Old: Custom IHI Stage2 >In about a week: NX75 shot, AFX Ecu
I while back XtremeRS posted how it was postsible to run 10 psi on stock bottom safely. I looked but come up empty.
Built 420a NER turbo kit T3/T04s ball bearing AFX UDP Crane 0014 cams
#38008, "RE: Attn: Star turbo kit owners!" In response to Reply # 9
i know a guy from tuners running 10 psi on stock internals. hes got hrc stage 2 w/ fmic. personally im never ever gonna go over 8 psi on stock internals. im getting hrc stage 2 probably with sidemount, havent decided yet. oh yea, and just how safe is 8 psi anyway? i know it comes preset to 8.
#38030, "RE: Attn: Star turbo kit owners!" In response to Reply # 11
Well hopefully I will get a little more than 200 at the wheels with my NER 1F kit, Crane 0014 cams, AEM cam gears, AFX pulley, 310cc injectors and a Spearco FMIC.
Kyle, I will make it down to pick up the clutch somtime this week. I was just so busy, I hadn't any time to get down there.
GO BUCS!!!!!
Built 420a NER turbo kit T3/T04s ball bearing AFX UDP Crane 0014 cams
Search
Printer-friendly copy
1 User in Chat
