hey im lookin for a turbo manifold for a 420a. i was told to look here on dsmtalk. i have a t3 turbo. i was told someone over here fabs them. i want to know the price for one and how long it takes get it. thanks for the help.

_______________________________________
The end of the internet begins here... www.broke-off.com

alain make good manifolds, the cost is $275 but Im not sure.

96 Eclipse RS - sold
92 Eclipse GSX

alain95i4

hes an avenger owner, see him more often at bbs.asog.net but he also frequents this board. good guy, knows his shit

95 Avenger
ATX->MTX Swap
Holset HX40 @ 26 psi

With my T3 and one of Alain's manifolds I can build 12psi by 2800 RPM. FYI

I was told Alain stopped making them...not sure if that is true.

But Motofool on here is making them as well. $250

>I was told Alain stopped making them...not sure if that is
>true.
>

Actually it's the opposite
I'm still doing manifolds and they are T3 only

I don't want to deal anymore with peoples that are stuck on the ideas sof using T-25, 14B, 13G because they are getting them for cheap
Or who wants to use a full T-4 and have no idea how huge its really is

Alain

one of the 2.4 true pionners

shoot me a pm or email and ill let u know the scoop, we have them copper coated and free egt bungs at this time, and also are offering a stainless version for a higher price,

You can have it cheap, fast or good. Pick any two.

If you want it cheap and fast, it's not going to be good.
If you want it cheap and good, it's not going to be fast.
If you want it good and fast, it's not going to be cheap.

>>I was told Alain stopped making them...not sure if that is
>>true.
>>
>
>Actually it's the opposite
>I'm still doing manifolds and they are T3 only
>
>I don't want to deal anymore with peoples that are stuck on
>the ideas sof using T-25, 14B, 13G because they are getting
>them for cheap
>Or who wants to use a full T-4 and have no idea how huge its
>really is
>
>Alain


hey i was wondering if you would sell me just the exhuast flange that mounts to the head. i already have a T3 exhuast flange. i work for a race shop and the guys i work with are gonna help me make equal length runners. i dont wanna take my factory manifold off to get measurements or whatever to make one and buyin a factory manifold is kinda pointless and a waste of money. i dont wanna take anything off of my car until my kit is complete and ready to be bolted on and tuned. just let me know if thats possible.

Thanks,
Dylan

_______________________________________
The end of the internet begins here... www.broke-off.com

You could buy an exhaust manifold GASKET and use that as a template.

>
>hey i was wondering if you would sell me just the exhuast
>flange that mounts to the head. i already have a T3 exhuast
>flange. i work for a race shop and the guys i work with are
>gonna help me make equal length runners. i dont wanna take
>my factory manifold off to get measurements or whatever to
>make one and buyin a factory manifold is kinda pointless and
>a waste of money. i dont wanna take anything off of my car
>until my kit is complete and ready to be bolted on and
>tuned. just let me know if thats possible.

I'm not selling mines
Search online and you could find a few places selling flanges

Alain

one of the 2.4 true pionners

there was an auction on ebay for a log style manifold with the turbo flange still unwelded to the manifold. it was a two piece pos but it might be what your looking for.

Having Problems? Heres my Three step solution to anything 2gnt related.
Step 1: Put down everything in your hands.
Step 2: Grab a lucky strike, Smoke it.
Step 3: Walk to the fridge, double fist some keystone ice, sit down in the shade, drink one beer, finish cigarette, drink other beer, roll a joint, smoke it, walk back to your problem, and in about 5 minutes the solution will come to you.
If not. Go here: here

If still nothing, your trying to hard. Start over at step 1.

Road Race Engineering sells T3 flanges i think..

_________________________________________
I'm the guy that bans you for breaking the rules. I am the troll killer. I am the law here.

yeah they do, for under 30 bucks if I remember correctly.

You can get all you need to make a custom turbo from turbo-performance.com:D

2.0L bored .20
Wiseco pistons
Eagle rods
T3/T60-1 turbo
Jeep 60mm Mod.
underdrive pulley
780cc injectors
AEM FIC
21psi