Just wondering who else was running a T-25 other than RxR_Eclipse.

How do you like the set-up? I mean if your only going to run 5-8psi why get a 16g right?

any feedback would be appreciated.

i'm running a T-25 (duh) it's a GST though..heh i doubt this helps your post sorry

Mark

'95 Eclipse GST - gone
'00 Jetta GLS

That was kinda my mentality for using it. A T25 is good for at least 10lbs strong.
As far as I know I am the only one who is using one on the 420A currently. I think there are a couple of peeps in the process of doing it.

Kevin
The old:


The new:

Wow, So how do you like it? What RPM do you hit full boost? What are you using for boost control?

when i rode in rxrs car he was boosting about psi close to 3krpms because his waste gate mod keeps the flapper open a little bit instead of fully closed,

i love the way his car pulls when it gets in boost was the first turbo car id ridden in and it was cool,

You can have it cheap, fast or good. Pick any two.

If you want it cheap and fast, it's not going to be good.
If you want it cheap and good, it's not going to be fast.
If you want it good and fast, it's not going to be cheap.

It pulls nice just like any car turbo car will. Motofool is right, my turbo now spools @ about 3K. The only thing I am using for boost control is my modded wastegate actuator. I am sure when I get my built internals and I put her @ 10lbs it will spool fully @ about 23-2500 rpm. I know this cause I have acidentally done it.

Kevin
The old:


The new:

oooooo, your making me giddy

Thanks

the wastegate actuator of the t-25 is set to 10 or 11 psi? How much psi you are running RxR_Eclipse?

96 Eclipse RS - sold
92 Eclipse GSX

get a 16g instead. maybe u can have my turbo when i buy my 16g in a few weeks.

96 gs-t
Boost,and air fuel gauge
Borla Exhaust and muffler
shitty 16" rims

not installed:
97-99 conversion
Sensie front
invader skirts
invader rear
double deck aluiminum wing
m-3 mirrors w/ led
Front strut bar
coilovers
reverse indiglo gauges
Kenwood excelon in dash tv/dvd
10 disc changer

wanted:
6 bolt motor
18" rims


Remdawgz@aol.com

96 gs-t
To much shit to list.


Remdawgz@aol.com

the wastegate actator for rxrs turbo came set to about 10-11psi, but since he has stock internals he modded the waste gate arm to make it so he boost about 5-6psi only,

there is another waste gate mod u can do that is superior and lets u adjust the spring in the wastegate i believe and that is a much better route to take,

You can have it cheap, fast or good. Pick any two.

If you want it cheap and fast, it's not going to be good.
If you want it cheap and good, it's not going to be fast.
If you want it good and fast, it's not going to be cheap.

If I recall right babybeclipse you're an auto right? If so than the t25 would be a good choice of a turbo seeing how it would barely have any lag time. I think Tommyboy was the first person to use a T-25 and I followed in his footsteps shortly after. It gives our slushbox of a tranny some pep but I would recommend getting a tranny cooler. In my eclipse, boost was almost instantaneous with the t-25 but now in my GSR I have an 18g and talk about laggy, anyhow, good luck


?


ALL STOCK!! except for this extra radiator in front of my stock bumper



ALL STOCK!! except for this extra radiator in front of my stock bumper

Don't have the stock Eclipse anymore
Just a stock Gsr now,

>If I recall right babybeclipse you're an auto right? If so
>than the t25 would be a good choice of a turbo seeing how it
>would barely have any lag time. I think Tommyboy was the
>first person to use a T-25 and I followed in his footsteps
>shortly after. It gives our slushbox of a tranny some pep
>but I would recommend getting a tranny cooler. In my
>eclipse, boost was almost instantaneous with the t-25 but
>now in my GSR I have an 18g and talk about laggy, anyhow,
>good luck

Yup, I'm auto. Thanks for the help.

Meet Da X- I would go s16g but...why? I only plan on runnin 5-8psi. I don't need a 16g for that. I have someone giving me a good deal on the t-25 but I might be interested in yours. How many miles are on it?

>there is another waste gate mod u can do that is superior
>and lets u adjust the spring in the wastegate i believe and
>that is a much better route to take,

It is a better route to take cause it allows you to lower the minimum boost while keeping the wastegate shut so you can spool as quickly as possible. Here's the link : http://www.denverspeed.com/wastegates.html


ride__________95 Eclipse RS : 5 speed
power________Field SFC Hyper-R : Gude cams : Jeep TB : AFX UDP : ram air : test pipe : GST catback
suspention___Hurricane F/R lower strut ties : BOMZ F/R upper strut bars : ES inserts
sound________Kenwood KDC 5000 : Audiovox 8" sub toob : Xplod 222
shizzle_______AutoCommand remote start : dual air horns : Caspers o2 simulator(rear)
incomming___Bosal header(maybe), 14b turbosystem(eventually)
Jeep TB writeup - http://www.dimensia.com:81/jimbo/JeepTBfor2gnt.html

95 Eclipse RS : 5 speed
14.76 @ 94.72mph
Jeep TB writeup - http://www.dimensia.com:81/jimbo/JeepTBfor2gnt.html

>It is a better route to take cause it allows you to lower the >minimum boost while keeping the wastegate shut so you can spool as >quickly as possible.

yeah thats a good mode but this mode cant be used on a t-25 because the wastegate actuator isnt straight all the way.

96 Eclipse RS - sold
92 Eclipse GSX

so what else can I try to turn DOWN the boost?

you can use the mod that RxR_Eclipse is using. check this link http://forums.2gnt.com/dcforum/DCForumID16/5666.html Im making a turbo kit with a t-25 and the mod that Im going to use is the one that RxR_Eclipse is using. hope this help!

96 Eclipse RS - sold
92 Eclipse GSX

I am sure that you can get a better mod to work with the T25 wastegate. I was almost going to take a external WG route. Any sugestions would be greatly appreciated.
Hmm I was just lookin at this pic. And I think that if you bent the copper looking bracket out, then bent the arm stright, then you could do it... I will still have to cut the arm cause by bending it out it makes it way to long. I may just buy another wastegate from dsmtrader and see what I can do about it.

Or it might just be easier to buy a 3-5lb wastegate actuator and fit it to the turbo.

Or whatever just some thoughts.

Kevin
The old:


The new:

> so what else can I try to turn DOWN the boost?

Trust me, you wont want to Boost is an addiction, you always want more. 8 psi will get boring eventually. I'm already there with less than a year...hehe.. But if you have the willpower and mindset to stay at 8 psi, then the T-25 will be nice, esp off the line. Those things spool like mad. Driving a GSX, i couldnt even tell when the boost kicked in, it was that smoothe. I still say go with the S16G though...more boost!!

13.5 @108 MPH-2.2 60ft(stupid FWD!)
S16G @ 18 PSI/FMIC/Running on MegaSquirt II (Now with sequential
fuel injection)
My webpage: http://eclipsed4evr.home.comcast.net
-1998 Mitsubishi Eclipse RS-T- "Toy"
-1992 Plymouth Laser Turbo AWD(SOLD)
-2000 Honda CR-V(daily)

>> so what else can I try to turn DOWN the boost?
>
> Trust me, you wont want to Boost is an addiction, you
>always want more. 8 psi will get boring eventually. I'm
>already there with less than a year...hehe.. But if you have
>the willpower and mindset to stay at 8 psi, then the T-25
>will be nice, esp off the line. Those things spool like mad.
>Driving a GSX, i couldnt even tell when the boost kicked in,
>it was that smoothe. I still say go with the S16G
>though...more boost!!

Well, I'm a collage student. That alone should tell you how broke I usually am. I just don't want to spike to 10psi and need a rebuild. Thats what I mean by turning DOWN the boost.

sup babyclipse... I spiked to 10psi in my auto gs with a t3/4 hehe no rebuild here.. damn mbc...

Member # 751


FOUNDER of the Central Cali chapter of 2GNT!
(I got kicked out after I refused to go Cow tiping) - Hehehe you know who this is for