How can you tell how much boost you are adjusting without giving gas?
Don't want to select 30 psi by accident and blow my engine up. Thanx

Your Garage is not worthy
For the Masterpiece you built
That only looks like it cost a Fortune
While most flaunt their cars by going fast
You show off Standing Still

You cant really. Just start off by turning out the adjustment bolt or whatever you got, to the setting that makes the boost controller not even controll boost. On mine, its by turning the nob all the way out. After that, just slowly, at VERY SMALL increments at a time, turn in the adjuster. Test the car at WOT. Repeat until you get desired boost levels.

13.5 @108 MPH-2.2 60ft(stupid FWD!)
S16G @ 18 PSI/FMIC/Running on MegaSquirt II (Now with sequential
fuel injection)
My webpage: http://eclipsed4evr.home.comcast.net
-1998 Mitsubishi Eclipse RS-T- "Toy"
-1992 Plymouth Laser Turbo AWD(SOLD)
-2000 Honda CR-V(daily)

Thanx for the help. Just don't want to see my connecting rod from the outside.

Your Garage is not worthy
For the Masterpiece you built
That only looks like it cost a Fortune
While most flaunt their cars by going fast
You show off Standing Still

You can buy my turboxs mbc

Set all the way to the lowest setting and then each 360* turn is roughly 1 psi.

------------------------------------------------
98 ESi
95 GS