Ok guys. I found a local place that has some injectors that I can get but they just throw all the injectors in a bucket so I have to sort through them....The guys assured me that they have some ford lighnting ones and some cobra mustang ones in there he just doesn't know which ones they are.
I need to know the part #s that are on the injectors so I can tell what ones are which...

Best part is they are $8 each!

Ok before you ask me to get them for you...if I can find a couple of sets I will sell them on here for a good deal.

But I need the part # on the injector.

Kevin
The old:


The new:

the 30lb mustang injectors have a red top. im pretty sure they're sorted by the color of the tops. if you find an extra set, im in.

edit: i just found this from various web sites...

Ford Motorsport Injector Color Code

Orange=19lb
Light Blue=24lb
Red=30lb
Silver or Dark Blue=36lb


More Ford injector part numbers:

Flow, Part no., Color, Application
14 lb/hr, F1ZE-B4C, Gray, 1.9 - 3.8L
19 lb/hr, FOTE-D1A, Yellow/Orange, 4.6L SOHC
19 lb/hr, FOTE-D5B, Yellow/Black, 5.0L, 4.6L SOHC
24 lb/hr, F2LE-B2A, Lt. Blue 4.6L DOHC
25.3 lb/hr, F3DE-A2B, Blue/Green 3.0L Flex Fuel
30 lb/hr, F1SE-E1A, Red, 3.8L SC

42lb = The part number on them reads: XL3V-A5A , and they have green top.

-Joe
___________________________________
White 98 Eclipse GS MT
Star Stage 2
*Stolen - 10/24/03*

Ok spicy....I will give you first dibs on any that I find...

I won't get anything under 30lbs.

Kevin
The old:


The new:

Yeah my set of Ford 30 lb injectors that is sitting in the garage are a maroonish red colored top. I'll see if I can find a part number on them for you.


________________________________________________________________________________________
Car Sold


http://hometown.aol.com/ohshootuhh/
www.Fast420A.com

Flame Red SRT-4 GT40,8.5:1 Built Shortblock, Brian Crower Stage 2 Cams, etc etc etc...

The part number for 42 lbs. is M-9593-F302
The part number for 30 lbs. is M-9593-B302

That is straight off of Ford Racing's website.

http://www.gnttype.org/techarea/fuelsystem/injflow.html

The above site has some good info, the 36 lbs. Bosch injectors which Ford uses for the SVO FI Kits have part number 0-280-150-967 according to the site. Good luck.

Luke

1998 Mustang GT 5-speed
2002 Lone Star Shelby Cobra Replica

If you find 2 extra sets drop me a line too.

I edited to the wiki!

If there's a 3rd set, keep me posted as well! i've been looking for a set of 30lb injectors for a while now! I've got the $$$, so let me know ASAP! Thanks!

Jeremy

96 Indy Red Dodge Avenger I4 5spd
225.7whp/227.2wtq @ 10psi, currently running 12-14psi.
HRC Stage III turbo setup
JE 8.8:1 pistons
Eagle rods
block bored .020" over
GReddy FMIC w/ custom piping
1G crushed BOV
SPEC Stage 3 clutch
2.5" DP, 2.5" high flow cat, 3" ERT catback w/ Magnaflow muffler and 3" tip.
much much more...

here is somone selling a set with 2500miles on them for around 95$ shipped i just talked to him on aim about them, old style will need connector upgrade for newer style injectors

http://neons.org/forums/viewtopic.php?t=66940

You can have it cheap, fast or good. Pick any two.

If you want it cheap and fast, it's not going to be good.
If you want it cheap and good, it's not going to be fast.
If you want it good and fast, it's not going to be cheap.

30lbs = what in cc's? I'm down for a set of 8 30lbs ford injectors if you can get enough. Let me know..

Robert Parkhurst
toykilla@comcast.net

30lb = 310cc I believe

I edited to the wiki!