Currently me and my friend are having a dilemma as to which BOV we want to order for our project. We want something that is definitely noticeable but not that TurboXS with the huge horn on the end. We were looking for high quality and performance, so question is, do you suggest the GReddy Type S, HKS SSBOV, Apexi Twin Chamber, or the Blitz Super Sound BOV. Any other suggestions are also appreciated, the car will run about 7 psi for a year, about 12 the next year with intercooler and then 15+ when we rebuild. I don't need anything like the GReddy Type R, thats overkill. Please let me know.

Luke

1998 Mustang GT 5-speed
2002 Lone Star Shelby Cobra Replica

I am using the type S and I love it.

Brynden

defiantely go with the greddy type s. wish i had gotten it, the type of sound it makes is so much cooler than the RFL that i have.

2016 WRX STi Limited (current)
2001 A4 1.8tqms (donated)
1991 GVR4 #1933 (sold)
old.dsmregistry.com/detail.php?carid=218 (dismantled)

I have the blitz dd and do not like it that much. I would get the type-s that is what I want to change to. They sound great!
Patrick
96 GS
HRC kit, S20G, FMIC, Howell bottom end 8.6 pistons, S-FMU, Blitz BOV, P&P head, SS valves, lots more little goodies

Patrick
96 GS
13.54 @ 106.94 mph on 15psi 21 May.04
HRC kit, S20G, FMIC, Howell bottom end 8.6 pistons, S-FMU, Blitz BOV, P&P head, SS valves, lots more little goodies

I'm tired of my Type-S whistling..it sounds coo but I want a new sound. The HKS standard one sounds pretty nice

Alvin

96 RST

Star Stage I turbo kit /Starion I/C w/ 2" chrome piping / GReddy Type-S BOV / Missing Link / Custom APEXi- GReddy 2.5" exhaust / 55mm ARD TB/ Nology wires / APEXi EL mech boost gauge / Autometer A/F gauge / Southland Dual Friction clutch / B&M short shifter / Energy Suspension shifter bushings / 16" GSX Rims / Front/ Rear camberkits / Eibach Prokits / Tokico Blues/ Front Upper, Rear Lower strut bars / Rear GST sway bar/ GSX Dual Piston Calipers, X-drilled/ slotted rotors

Alvin

http://www.cardomain.com/id/96rst

Hey semperboost let me know if you want to sell your type s
Patrick
96 GS
14.14 @ 96.5 mph on 8psi 8 Nov.02
HRC kit, S20G, FMIC, Howell bottom end 8.6 pistons, S-FMU, Blitz BOV, P&P head, SS valves, lots more little goodies

Patrick
96 GS
13.54 @ 106.94 mph on 15psi 21 May.04
HRC kit, S20G, FMIC, Howell bottom end 8.6 pistons, S-FMU, Blitz BOV, P&P head, SS valves, lots more little goodies

hks ss bov has the most noticable sound and its always very crisp pchsst gets my vote if u go to dsmtuners.com under general i bleive they ahve a blow of bov sound page link...

You can have it cheap, fast or good. Pick any two.

If you want it cheap and fast, it's not going to be good.
If you want it cheap and good, it's not going to be fast.
If you want it good and fast, it's not going to be cheap.

1G bov! Really good pshhhhhhttttttt

Kevin
The old:


The new:

rfl owns imo. type s would be my 2nd choice. HKS ssqv isn't loud at enough imo.

hey guys this might help you out, has all the bovs you can think of in action!
http://www.socalsupras.com/tuning/blowoffvalve.html


Dwayne H
A.K.A D-low
"PAID THE COST TO BE THE BOSS"

Exterior mods:
11 peice Kaminari wide body kit* custom fiber glass hood, PHAT* supra taillights* targa top* black/blue/chrome projectors* supra double stack wing w/ Carbon fiber top deck* shaved all body lines, shaved antennas.*
Suspension: Blowjax air cylinders* 3/8 inch electric valves* 1/2 inch lines* 5gallon air tank* 2 accumlators* strut bars
Rollers and stopies: 19x8 ACE menaces, chrome 225/19/35 front 275/19/35 rear AEM big brake upgrade (front Electronics (ALL): Msd ignit.
Apexi AFC *Apexi AVC-r*Apexi Rev/speed*Greddy TT*Automete A/F* Autometer Boost* Autometer volt* Autometer Fuel presure* Autometer water temp* Autometer egt*Autometer Oil presure*Autometer cluster bezel*Autometer triple pillar pod*Playstaion 2 fiberglassed in were passenger air bag used to be 7inch wide screen LCD*4 5 inch PB speakers ( 2 per door)*2 6x9 Pb speakers*
1 15inch PB extream sub* 1 1500 us amp* the whole dash, door sills,console, panes etc, is fiberglassed. the apexi components are molded in to the dash so you only can see the face (flushed)
Brand new Hrc manifold *Brand new Hrc 16g Turbo *Turboxs RFL BOV* Custom DOwn pipe 3inch 2 N1 Apexi Canisters*( the real deal, not that Ebay bullshit)race cat *
i need a good front mount intercooler, and some bodys stage 2 piping that they dont need or i will have to get it customized J.E pistons* Eagle specialty rods*5angle port and polish cam gears crane turbo cams bore TBbore intake manny maybe some High performance valves.Underdrive pullysstage 4 clutch kit*8lb flywheel*walbro 255 490cc injectors ,chasis: 8 point rollcage with removable door bar. reinforces the roof, due to the targa top

Thanks everybody

Luke

1998 Mustang GT 5-speed
2002 Lone Star Shelby Cobra Replica