after 6 months i finally have everything for my hrc stage 2 kit but the dp and they won't sell one to me. i don't have my invoice # for my kit becuase i bought it used. does anyone know a place to get a dp to fit the hrc kit?
98 esi A/t: injen intake n1 muffler white gauges 17' adr sokodu's coilovers 1.75' drop obx front strut bar 3 stage metal headgasket (should of rebuilt bottem when this was done but I'm stupid)
98 esi A/t: injen intake n1 muffler white gauges 17' adr sokodu's coilovers 1.75' drop obx front strut bar 3 stage metal headgasket (should of rebuilt bottem when this was done but I'm stupid)
#34375, "RE: i feel like selling my F@%# kit" In response to Reply # 0
As far as I know, there isn't anything out right now aftermarket. I have just been way too busy at home of late to attempt any sort of trip up to Chicago to complete last minute fitting for ERT.
However, I'm sure any muffler shop could make you a small diameter DP (2"-2.25" perhaps) without much difficulty. It just depends on the muffler shop. You might want to purchase your own flex section since that's probably the most expensive part of the construction.
_____________________________________ Jason ESi-T
04' BMW 325Ci 91' Nissan 240SX 98' Eagle Talon ESi (sold)
#34376, "RE: i feel like selling my F@%# kit" In response to Reply # 3
Yea man just go to a muffler shop. I had mine done for like 200 bucks. Don't give up. I have had similar things happen to me with HRC they suck! Don't want to help anyone out.
#34378, "RE: i feel like selling my F@%# kit" In response to Reply # 5
Give up! Give up! That way I can buy your piping and i/c!!!
Just kidding, man, alhtough i'm looking for stage 2 piping and i/c (shameless advertisement again!)
I had a shop do a custom exhaust, from the turbo back through the cat (they took it off altogether!) And it only cost 150 bucks, aside from the fact they didn't put a flex section on it, they did a great job.
Jon
1997 Eclipse RS
14.21@101mph 10/4/02
MODS: 8.8:1 JE Pistons / Eagle rods / Stage 1 Hahn turbocharger / Melling Oil Pump / Autometer 5" tach / 4 JL 12" W0 subwoofers / Clarion 230w amp / short shifter mod / GReddy EVO exhaust / custom 2 1/2" downpipe / no cat con / CM Stage 1 / 30lb Mustang injectors / TurboXS MBC / 1G SMIC / Eibach Sportline springs / KYB GR-2 struts / GReddy 52mm EGT / A'PEXi Super AFC
#34379, "RE: i feel like selling my F@%# kit" In response to Reply # 6
Do you just need the HRC pipe that comes with the kit? I'm talking about the short one you need to cut your stock downpipe to make it work. If so, I think I have an extra one I don't need. Lemme know.
Greg
'19 Genesis G70 3.3t AWD '88 Chrysler Conquest TSI
#34380, "RE: i feel like selling my F@%# kit" In response to Reply # 7
yeah , i need the dp that comes with the kit and slips over the stock dp that you cut. if you got that i will gladly take it off you hands. name the price or email me jsd98dsm@aol.com
98 esi A/t: injen intake n1 muffler white gauges 17' adr sokodu's coilovers 1.75' drop obx front strut bar 3 stage metal headgasket (should of rebuilt bottem when this was done but I'm stupid)
98 esi A/t: injen intake n1 muffler white gauges 17' adr sokodu's coilovers 1.75' drop obx front strut bar 3 stage metal headgasket (should of rebuilt bottem when this was done but I'm stupid)
#34381, "RE: i feel like selling my F@%# kit" In response to Reply # 8
good old greg. i'm assuming you are selling downpipe from your car? just wondering how much shit you got when you bought rs_guys car. lol
you've bailed my butt out of the water a few times when i needed some weird ass parts. hheee
http://home.bendcable.com/optimuspeterson <<<<HRC Stage 2 and Star Instructions 95 Eclipse - SOLD | 93 BMW 318is - SOLD | 2000 S-10 Extreme on 20's - SOLD 93 Toyota/shaved/bagged/body dropped - SOLD | 97 GSX - SOLD 2006 Scion tC
#34382, "RE: i feel like selling my F@%# kit" In response to Reply # 9
If greg doesnt have one, then I do. The only thing with mine is that it has a flange welded onto it that you can just cut off. If you wind up needing it, e-mail me.
SANDMAN: I am the one that will be coming to Chicago from Michigan for the ERT downpipe unless you found someone else... I wont be coming this weekend though, but I am hoping the weekend after will work out. I'll be in touch.
Matt 1995 Eclipse GS 2.0L, S16g Turbo, 8 Injectors, 26psi
1998 Eclipse GSX 2.3L Stroker, AEM EMS Converted to Speed Density, FP3065 Turbo, 35psi , and so on...
#34383, "RE: i feel like selling my F@%# kit" In response to Reply # 10
Just let me know when, last I talked to Matt it was this weekend? Works out better this way I guess, I have to get a few things out before to make some room
It'll probably only take an hour or so to modify the prototype, the rest is sitting and waiting for your car to cool and get the HRC pipe out.
Search
Printer-friendly copy
1 User in Chat
