Hey all, Been wanting to post here about my results of my motor...been so damn busy acumulating parts.

anyways In order of cylinder 1 through 4:
cylinder 1: Bent rod, pistons okay
cylinder 2: Cracked ringland, about 1.5" long
cylinder 3: slight hairline fracture on the ringland
cylinder 4: cracked ringland and bent rod.

Overall I do not see pit marks on the surface of any pistons...

Maybe the single detonation episode was so sever that my precious stock internals couldn't handle it..

Anyways the motor is torn down, all parts is here. Car should be back on the road by late next week...hopefully.

Looking forward to force induction with forge parts at 5psi again. Hey, I need the car to last :p

-K-

5psi is for little girls, haha .. atleast 9psi, dont forget if you go with lower compression your car will be slower at the same amount of boost.u got a ob2 tool so u can see how much advancing and fuel trim etc. well let us know the update. im slowly ordering the parts for rebuild. got my lifter and rockers on order.hehe slowly



Michael 99gs
HRC Stage 2
Stage 3 process begins anyone got a 420a block thats not spun/head for sale?

http://www.dreamwater.net/purplebeast

Michael
99gs hrc stage 5000 SOLD...
2004 Honda Accord V6 (240 hp)stock
what other car should i buy?? hmmm
Car info & pictures at http://www.cardomain.com/memberpage/520269

Wow.... 2 bent rods on 5 psi... geez, you must've been detonating real bad. The ring lands don't surprise me at all, but the rods sure do. You have pics of all that broken stuff? It's good to see you'll have it all back in working order soon man.

Matt
1995 Eclipse GS
2.0L, S16g Turbo, 8 Injectors, 26psi

1998 Eclipse GSX
2.3L Stroker, AEM EMS Converted to Speed Density, FP3065 Turbo, 35psi , and so on...

hey matt, his vacuum line came loose causing him to spike to like 14-16psi about. thats why his car was mess up.
so hows your breaking in process coming along matt?


Michael 99gs
HRC Stage 2
Stage 3 process begins anyone got a 420a block thats not spun/head for sale?

http://www.dreamwater.net/purplebeast

Michael
99gs hrc stage 5000 SOLD...
2004 Honda Accord V6 (240 hp)stock
what other car should i buy?? hmmm
Car info & pictures at http://www.cardomain.com/memberpage/520269

oh, the spike was the cause? I figured it was a NER kit.



Thanks, Richard (TURBO'd 97 ESi)
http://www.ourformerselves.com/


BEST TRACK TIME -- 16.46 @ 86.03mph (before turbo)
----------------------------------------------------------
VEGAS DSM'Rs:
http://www.ourformerselves.com/VegasDSM/
----------------------------------------------------------

Thanks, Richard -- 97 ESi
16.46 @ 86.03mph

http://www.ourformerselves.com/
http://www.cardomain.com/id/talonipse/

AEM COLD AIR INTAKE | PACESETTER 2.5" MONZA CAT-BACK EXHAUST SYSTEM | OBX B5 MUFFLER | ENERGY SUSPENSION FRONT & REAR MOTOR MOUNTS | 18X7" ENKEI RSF2 WHEELS W/ NITTO NT 450 215/40Z TIRES | GOLDLINE LOWERING SPRINGS | KYB AGX STRUTS | INGALLS FRONT & REAR CAMBER ADJUSTERS | ALPINE CDA-9807 RECIEVER | ALPINE MRD-M300 AMP | ALPINE SWR-1041D 10" TYPE R SUB | Q-LOGIC QLH-.6510SX ENCLOSURE | STINGER HPM 8GA AMP KIT | DAYTONA BLUE PAINT JOB | IMPULL R34 FRONT BUMPER | BLITZ REAR BUMPER | BLITZ SIDE SKIRTS | ECLIPSE TURBO WING | PROJECTOR HEADLIGHTS (BLACK/BLUE) | EURO ALTEZZA TAILLIGHTS | STREET GLOW SG-201 NEO-BLUE NEON UNDER CAR KIT | SPAL AMENITY SHAVED DOOR KIT | REVERSE NITE GLOW GUAGES | OBX SHORT THROW SHIFTER | SYMBORSKIT SHIFTER KIT | AFTERMARKET BLUE SHIFTER | NOKYA FOOT PEDALS

The break-in has come and gone. I hooked up the secondary fuel rail for the 8 injector setup and it leaks, so I gotta fix that. For the moment, I stuck the old craptech regulator on and am boosting about 7 psi. It is pulling hard as ever so far. Can't wait for 15 psi.

Matt
1995 Eclipse GS
2.0L, S16g Turbo, 8 Injectors, 26psi

1998 Eclipse GSX
2.3L Stroker, AEM EMS Converted to Speed Density, FP3065 Turbo, 35psi , and so on...

how come u put that fpr back on?

Michael 99gs
HRC Stage 2
Stage 3 process begins anyone got a 420a block thats not spun/head for sale?

http://www.dreamwater.net/purplebeast

Michael
99gs hrc stage 5000 SOLD...
2004 Honda Accord V6 (240 hp)stock
what other car should i buy?? hmmm
Car info & pictures at http://www.cardomain.com/memberpage/520269

It's just temporary. I disconnected my secondary rail supply line so it doesnt get any fuel, so it doesnt leak. I am only using that fpr until I get a chance to pull the 2nd fuel rail off and seal it off. Once I'm done with that, then I'll be tuning the 8 injector setup and running more boost.

Matt
1995 Eclipse GS
2.0L, S16g Turbo, 8 Injectors, 26psi

1998 Eclipse GSX
2.3L Stroker, AEM EMS Converted to Speed Density, FP3065 Turbo, 35psi , and so on...

yeah, anything over ~15psi and stock rods will bend. I'm still amazed that mine took it when i spiked to 20PSI twice.

______________________________
If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.

'95 Eclipse TurboGS (garage deco)
'95 TSi AWD (restoring a survivor)
'97 Talon ESi-T (poor impulse control)
'99 Eclipse RS-T (daily beater)
'13 Evo X (mostly stock)
'17 Sienna (Middle Aged Dad Mobile)



Factory Service Manuals: http://nawdu.de/files/

hey matt what regualtor you using with the 8 inj, set up? the aeromotive? where did you get it? all i need to get mine running is the regualtor and the programs... any chance you can email them to me la_pmp@hotmail.com or pm or something? you use aim? heres my aim sn razorsharkusa thanks.

Member # 751


FOUNDER of the Central Cali chapter of 2GNT!
(I got kicked out after I refused to go Cow tiping) - Hehehe you know who this is for

Yea, I'm using the aeromotive. I bought it from summit. As far as the program is concerned, I thought you could download it from the EIC website, but if not, I can try to email them to you.

Matt
1995 Eclipse GS
2.0L, S16g Turbo, 8 Injectors, 26psi

1998 Eclipse GSX
2.3L Stroker, AEM EMS Converted to Speed Density, FP3065 Turbo, 35psi , and so on...

dope kaiser, let me know if you need a hand with anything... i've been putting some serious wrench time into my cars lately so i'm in the moooooood hehe good luck with the rebuild!

PS- CONGRATS on bending rods!!!! 10 points for effort!!!

OWNED!

Holy crap! I never saw a bent rod before. That's pretty wild.

___________
Kon C

"Sometimes, a man has to do what a man has to do."

Cool cool Dan. I got the shop to do the rebuild so I don't have to do much. The shop is really knowledgable, but I will see the final product when i get my ride back.

Let me know if you need help with your shit. I need to rack up 1500-3000 miles for the ring break in. So I need a few destinations to drive to. So far I have in mind your place, James, SanDiego a few times, Laguna beach a few times, and Irvine.

No pic on the pistons and rods, but it is no where as bad as the one Dan posted. I will try to search for someone with a digital that can host it for me.

Thanx for everyone's help on my problem. Looking forward to being back on the road again with new slugs in my motor.

-K-

yeah thats how its suppose to work. I already dl at home and at school but both times i try to run it it said that a file was corrupted and to dl again. so im guessing maybe its the servers problem? my isp at home is down for now so ill try and get to my e-mail via the csu's computers. thanks. hope you dont mind me asking you questions from time to time right? your one of the phew ppl i knew thats actually getting the 8 injector set up going.

Member # 751


FOUNDER of the Central Cali chapter of 2GNT!
(I got kicked out after I refused to go Cow tiping) - Hehehe you know who this is for

I'd email Javad about the software issue. I know DL'ing one of the files is somewhat of a trick due to its format in a word processing program or something, but I'm the wrong person to talk about with that stuff.

The software has worked just fine for me though.

_____________________________________
Jason ESi-T

04' BMW 325Ci
91' Nissan 240SX
98' Eagle Talon ESi (sold)

Thats a really nice job on those rods. Very consintent. And 3 of 4 with breaking any. Very nice. I hope I end up that lucky.

I have a 95 TSi. Stock w/big crusty 3" cat back.