Well today I finally finished w/ my turbo install. After putting on my new oil feed line, since the first one was cracked and squirted oil all over my manifold, turbo, & downpipe. Well I started it up, found no leaks. Then after about 30 seconds when I guess the downpipe and things started to heat up I started seeing smoke coming up. There were no leaks. Could this just be the oil that was spilled on the parts burning off.. or might it be something else? I turned the car off immediately since I wasn't sure if it was just the excess oil on the parts, or if it was something else.



Thanks, Richard (97 ESi)
http://www.ourformerselves.com/


BEST TRACK TIME -- 16.46 @ 86.03mph (before turbo)
----------------------------------------------------------

CURRENT MODS:
NER 1F Turbo Kit w/ Turbonetics T3/T4 S-Trim Ball Bearing Turbo || Autometer Phantom Boost, Oil Pressure, & EGT Guages || Autometer Cluster Benzel || Autometer Full Pillar || HKS Type-1 Turbo Timer || NKG BKR7E Spark Plugs || Magnacor 8.5 Ignition Wires || Front & Rear Strut Bars || Eibach Springs Pro-Kit || KYB AGX Adjustable Shocks/Struts || AF/X Underdrive Pulley || Pacesetter - Monza Exhaust System || OBX Racing Sports - B5 Bomb Tunable Muffler || Energy Suspension - Motor Mount Inserts || Bored Throttle Body || Konig 17x7" Silver Rated R Wheels || Yokohama Avid H4/V4 215/45R17 91H Tires

POINTLESS MODS:
Sylvania Cool Blue Headlights || Cobra Eyes Windshield Washer Blue LED Lights || Nokya Motorsports Sport Pedal Set

Thanks, Richard -- 97 ESi
16.46 @ 86.03mph

http://www.ourformerselves.com/
http://www.cardomain.com/id/talonipse/

AEM COLD AIR INTAKE | PACESETTER 2.5" MONZA CAT-BACK EXHAUST SYSTEM | OBX B5 MUFFLER | ENERGY SUSPENSION FRONT & REAR MOTOR MOUNTS | 18X7" ENKEI RSF2 WHEELS W/ NITTO NT 450 215/40Z TIRES | GOLDLINE LOWERING SPRINGS | KYB AGX STRUTS | INGALLS FRONT & REAR CAMBER ADJUSTERS | ALPINE CDA-9807 RECIEVER | ALPINE MRD-M300 AMP | ALPINE SWR-1041D 10" TYPE R SUB | Q-LOGIC QLH-.6510SX ENCLOSURE | STINGER HPM 8GA AMP KIT | DAYTONA BLUE PAINT JOB | IMPULL R34 FRONT BUMPER | BLITZ REAR BUMPER | BLITZ SIDE SKIRTS | ECLIPSE TURBO WING | PROJECTOR HEADLIGHTS (BLACK/BLUE) | EURO ALTEZZA TAILLIGHTS | STREET GLOW SG-201 NEO-BLUE NEON UNDER CAR KIT | SPAL AMENITY SHAVED DOOR KIT | REVERSE NITE GLOW GUAGES | OBX SHORT THROW SHIFTER | SYMBORSKIT SHIFTER KIT | AFTERMARKET BLUE SHIFTER | NOKYA FOOT PEDALS

thats probably all it is. Just leave yer hood open and look for where the smoke is coming from. My guess is that if you leave it to idle for 10 mins, it'll be gone.

Matt
1995 Eclipse GS
2.0L, S16g Turbo, 8 Injectors, 26psi

1998 Eclipse GSX
2.3L Stroker, AEM EMS Converted to Speed Density, FP3065 Turbo, 35psi , and so on...

I'll try and wipe off what I can tomorrow then start it up. And if my car explodes I'm gonna have to sue you. j/p


Thanks, Richard (97 ESi)
http://www.ourformerselves.com/


BEST TRACK TIME -- 16.46 @ 86.03mph (before turbo)
----------------------------------------------------------

CURRENT MODS:
NER 1F Turbo Kit w/ Turbonetics T3/T4 S-Trim Ball Bearing Turbo || Autometer Phantom Boost, Oil Pressure, & EGT Guages || Autometer Cluster Benzel || Autometer Full Pillar || HKS Type-1 Turbo Timer || NKG BKR7E Spark Plugs || Magnacor 8.5 Ignition Wires || Front & Rear Strut Bars || Eibach Springs Pro-Kit || KYB AGX Adjustable Shocks/Struts || AF/X Underdrive Pulley || Pacesetter - Monza Exhaust System || OBX Racing Sports - B5 Bomb Tunable Muffler || Energy Suspension - Motor Mount Inserts || Bored Throttle Body || Konig 17x7" Silver Rated R Wheels || Yokohama Avid H4/V4 215/45R17 91H Tires

POINTLESS MODS:
Sylvania Cool Blue Headlights || Cobra Eyes Windshield Washer Blue LED Lights || Nokya Motorsports Sport Pedal Set

Thanks, Richard -- 97 ESi
16.46 @ 86.03mph

http://www.ourformerselves.com/
http://www.cardomain.com/id/talonipse/

AEM COLD AIR INTAKE | PACESETTER 2.5" MONZA CAT-BACK EXHAUST SYSTEM | OBX B5 MUFFLER | ENERGY SUSPENSION FRONT & REAR MOTOR MOUNTS | 18X7" ENKEI RSF2 WHEELS W/ NITTO NT 450 215/40Z TIRES | GOLDLINE LOWERING SPRINGS | KYB AGX STRUTS | INGALLS FRONT & REAR CAMBER ADJUSTERS | ALPINE CDA-9807 RECIEVER | ALPINE MRD-M300 AMP | ALPINE SWR-1041D 10" TYPE R SUB | Q-LOGIC QLH-.6510SX ENCLOSURE | STINGER HPM 8GA AMP KIT | DAYTONA BLUE PAINT JOB | IMPULL R34 FRONT BUMPER | BLITZ REAR BUMPER | BLITZ SIDE SKIRTS | ECLIPSE TURBO WING | PROJECTOR HEADLIGHTS (BLACK/BLUE) | EURO ALTEZZA TAILLIGHTS | STREET GLOW SG-201 NEO-BLUE NEON UNDER CAR KIT | SPAL AMENITY SHAVED DOOR KIT | REVERSE NITE GLOW GUAGES | OBX SHORT THROW SHIFTER | SYMBORSKIT SHIFTER KIT | AFTERMARKET BLUE SHIFTER | NOKYA FOOT PEDALS

If you got oil on the exaust mani, it will smoke for quite some time. It did on my install, and it freaked me out at first, but its only burning oil, no need to worry..

13.5 @108 MPH-2.2 60ft(stupid FWD!)
S16G @ 18 PSI/FMIC/Running on MegaSquirt II (Now with sequential
fuel injection)
My webpage: http://eclipsed4evr.home.comcast.net
-1998 Mitsubishi Eclipse RS-T- "Toy"
-1992 Plymouth Laser Turbo AWD(SOLD)
-2000 Honda CR-V(daily)

Thanks for the help! I feel better about that now.


Thanks, Richard (97 ESi)
http://www.ourformerselves.com/


BEST TRACK TIME -- 16.46 @ 86.03mph (before turbo)
----------------------------------------------------------

CURRENT MODS:
NER 1F Turbo Kit w/ Turbonetics T3/T4 S-Trim Ball Bearing Turbo || Autometer Phantom Boost, Oil Pressure, & EGT Guages || Autometer Cluster Benzel || Autometer Full Pillar || HKS Type-1 Turbo Timer || NKG BKR7E Spark Plugs || Magnacor 8.5 Ignition Wires || Front & Rear Strut Bars || Eibach Springs Pro-Kit || KYB AGX Adjustable Shocks/Struts || AF/X Underdrive Pulley || Pacesetter - Monza Exhaust System || OBX Racing Sports - B5 Bomb Tunable Muffler || Energy Suspension - Motor Mount Inserts || Bored Throttle Body || Konig 17x7" Silver Rated R Wheels || Yokohama Avid H4/V4 215/45R17 91H Tires

POINTLESS MODS:
Sylvania Cool Blue Headlights || Cobra Eyes Windshield Washer Blue LED Lights || Nokya Motorsports Sport Pedal Set

Thanks, Richard -- 97 ESi
16.46 @ 86.03mph

http://www.ourformerselves.com/
http://www.cardomain.com/id/talonipse/

AEM COLD AIR INTAKE | PACESETTER 2.5" MONZA CAT-BACK EXHAUST SYSTEM | OBX B5 MUFFLER | ENERGY SUSPENSION FRONT & REAR MOTOR MOUNTS | 18X7" ENKEI RSF2 WHEELS W/ NITTO NT 450 215/40Z TIRES | GOLDLINE LOWERING SPRINGS | KYB AGX STRUTS | INGALLS FRONT & REAR CAMBER ADJUSTERS | ALPINE CDA-9807 RECIEVER | ALPINE MRD-M300 AMP | ALPINE SWR-1041D 10" TYPE R SUB | Q-LOGIC QLH-.6510SX ENCLOSURE | STINGER HPM 8GA AMP KIT | DAYTONA BLUE PAINT JOB | IMPULL R34 FRONT BUMPER | BLITZ REAR BUMPER | BLITZ SIDE SKIRTS | ECLIPSE TURBO WING | PROJECTOR HEADLIGHTS (BLACK/BLUE) | EURO ALTEZZA TAILLIGHTS | STREET GLOW SG-201 NEO-BLUE NEON UNDER CAR KIT | SPAL AMENITY SHAVED DOOR KIT | REVERSE NITE GLOW GUAGES | OBX SHORT THROW SHIFTER | SYMBORSKIT SHIFTER KIT | AFTERMARKET BLUE SHIFTER | NOKYA FOOT PEDALS

Definitly just burning oil......

former did you get any gaskets with your turbo? it says in the instructions but i didnt get any so i was wondering what you did to correct that? thanks ben

http://www.imagestation.com/album/pictures.html?id=2134181717&mode=slideshow
t3/t4 setup, je pistone, eagle rods,aem cam gears, crane cams, port and polished head w swirl polished valves, avcr, autometer gauges to be installed, kaminari widebody kit shaved rain seals, door handles, tail lights, relocated gas cap, double humped hood, house of kolors candybrandywine 20in weld evo wheels, air ride, custom fiberglass work (dash interior) more to come just not enough time

I got 3 gaskets with my ner kit this morning. One for the wastgate, one for the turbo to exhaust mani, and 1 that goes to something else i forgot but i think that is all that you need.

I got some smoke for a little while on my car after I installed my turbo as well. I wouldn't worry about it.

Jason
'11 Ford Mustang GT/CS
'11 Ford Mustang V6 6-Speed (SOLD)
'04 Nissan 350z Touring (SOLD)
'95 Turbo Eclipse GS (SOLD and will be missed)
'90 Talon TSi AWD (SOLD)

i didnt get any gaskets. i suppose we will give it a whirl thanks and let me know how the install goes

http://www.imagestation.com/album/pictures.html?id=2134181717&mode=slideshow
t3/t4 setup, je pistone, eagle rods,aem cam gears, crane cams, port and polished head w swirl polished valves, avcr, autometer gauges to be installed, kaminari widebody kit shaved rain seals, door handles, tail lights, relocated gas cap, double humped hood, house of kolors candybrandywine 20in weld evo wheels, air ride, custom fiberglass work (dash interior) more to come just not enough time