ok i have a 1999 rs iam going to instal the fpr what should i install in the back buy the stockkone ?i also dont know how to hook it up please help me and give some dirctions please iam in the middle of doin it!!!!!!!!!!!!!thank you also how do i hook up the oil return line to the hose thats tached to the pipe?
#30239, "RE: need help!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!" In response to Reply # 0
Do you have any directions?
We don't know what system you have or anything. You need to focus your questions. It's next to impossible to describe which fittings go where in what order.
If you have the HRC kit, you totally remove the stock FPR, and install a fuel return line from the fuel tank up to the FPR and then to the test port.
_____________________________________ Jason ESi-T
04' BMW 325Ci 91' Nissan 240SX 98' Eagle Talon ESi (sold)
#30241, "RE: need help!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!" In response to Reply # 2
Otay! I take it that you got the Vortech FMU. I did it awhile back but there are three lines (I think). One gets ran back to the intake for a strong vac signal, and the other two get hooked up to the stock FPR. Read the directions on that one. It's dark here so I wouldn't be able to tell which is which on my car. The oil return for the turbo is a heater hose that goes from the oil pan (that you drilled through) to the bottom of the turbo. You should have tefloned the fitting first then screwed it into the bottom of the turbo.
#30242, "RE: need help!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!" In response to Reply # 3
ok so i dont have to run a line to the fuel rail and the vac just the vac.and the other 2 go to the stock fpr.alos do i have to take out the stock one or just mount it next to it and do what????thankx for your help so far
#30244, "RE: need help!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!" In response to Reply # 5
hey if i mount the fuel pressure risser in the back by the fuel filter i will have to run what? an vac line up to the intake man...do i have to run it to the fuel rail is thier any other why to do it??what do you think where should i mount it?
#30246, "RE: need help!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!" In response to Reply # 7
If you could write your sentences a little more carefully (...say in English perhaps), I could help you. As it is, I can't even understand what you're trying to ask. sorry.