First are these necessary? (I'm guessing yes...)

Is the list on http://www.2gnt.com/files/arpstuds.htm complete?

How do I explain to the machine shop exactly how much to machine down..i.e. 1/8" or 1/4" which is it?

3 Heat Cycles... I am assuming that this means check the head bolts by removing the valve cover right??? Otherwise taking the engine apart again seems kinda illogical..

Thanks,

Guy
RS_Guy



13.9sec @ 105mph passes
w/ Blown piston rings,
on Stock Internals
at 10psi Boost....

-----
www.GTuned.com