Are all injectors universal?...So can I use 30lb (310cc) injectors of any car and it'll still work? My fren with a LS DRAG was talking bout getting some 310cc also and was talking bout getting SATURATED over PEAK & HOLD cuz something bout a resistor box was needed for the second one. Please help me out with a lil info on em...I'm planning on getting some 30lbs and getting a 8:1 disk soon
.thanks

ALVIN
96 RST


http://www.kaptainmyke.com/tir/gallery/SemperBoost
Star Stage I turbo kit /Starion I/C w/ 2" chrome piping / GReddy Type-S BOV / Splitsec VC1 / Custom APEXi- GReddy 2.5" exhaust / Nology wires / Dual Gaugepod pillar mount / APEXi EL mech boost gauge / Autometer A/F gauge / Southland Dual Friction clutch / B&M short shifter / Energy Suspension shifter bushings / 17" Axxis Wheelsitemesh on 225/45s / Front/ Rear camberkits / Eibach Prokits / Tokico Blues/ Front Upper, Rear Upper/Lower strut bars / Rear GST sway bar
X-drilled rotors / Axxis pads / Stock GS/GST sideskirts /Color-matched center taillight/ door handles/ sideviews
Cleared Headlight turns/PIAA bulbs

Alvin

http://www.cardomain.com/id/96rst

Yo Alvin,
We need High impedence injectors for our car, these are also known as saturated injectors. they need to be able to replace a Bosch style injector. i think the most economical way is to get some ford racing injectors. I got 8 off of ebay for like 180 bucks. and sold the other four. if you are going to use other brand injectors just make sure that they are compatible with bosch style injectors. the 440's i got from RC engineering are Lucas brand injectors, but they have some slight modifications that make them fit in our application.
Hope this helps
Lates
James

Rest In Peace Heidi Doggy

hey what do you know about msd injectors. Will their injectors fit on our cars and mustangs what are the stock injectors that they bring 30 pounds

DsM Power Soon to be turbo yahhhhhh

i remember someone a while back did measurements on the MSD injectors and said that they will fit, but i am not sure of that!
lates
james

Rest In Peace Heidi Doggy

damnnn so i guess if no one is sure i should not buy them, now wich are the compatible ones that are bolt on ???

Actually wich are the best to put on our cars aftermarket ones ???
If mustang are PnP on our cars then any aftermarket mustan injectors will work on our cars that is saturated right

DsM Power Soon to be turbo yahhhhhh

Hey, i know somebody with some 440's for sale, what modifications must we do to have them fit our car????




Jon

1997 Eclipse RS

MODS: 8.8:1 JE Pistons / Eagle rods / Stage 1 Hahn turbocharger / Melling Oil Pump / Autometer 5" tach / 2 JL 12" W0 subwoofers / JL Audio 500/1 amp / Clarion 230w amp / short shifter mod / GReddy EVO exhaust / custom 2 1/2" downpipe / no cat con / CM Stage 1

Jon

1997 Eclipse RS | 2001 Lexus IS300
12.671 @ 111.660 1.586 60' 5/28/04

www.haiokuracing.com

OK...i have accel PIN type 30lb injectors in my romm...are you saying that i have to have saturated?? If so plz emial me





Life is a bitch. Slap it around a little.

TURBO-HRC stage 1 Moddified

Howell Bottom end in room. Waiting to be unleashed.



email me at Anthonyl469@aol.com




"When you reach real ability you will be able to become one with the enemy. Entering his heart you will see that he is not your enemy after all." -Tjusii

1998 Integra Type R #0072