well im only a hrc stage 2.. but i plan to throw it on a dyno, and get it tuned a bit.. i got some 315cc injecs a ignition to retard timing if needed.. i will run it at 9psi for the dyno run when i do it.. how much advance should i be shooting for? this is with also 91octane only...



Michael 99gs
HRC Stage 2
http://www.dreamwater.net/purplebeast

Michael
99gs hrc stage 5000 SOLD...
2004 Honda Accord V6 (240 hp)stock
what other car should i buy?? hmmm
Car info & pictures at http://www.cardomain.com/memberpage/520269

around 20 deg. advance. The ecu will do the advancing, as far as I know there is now way for you to advance your timing other than the advancing of your cam gears. You can retard your timing w/ the ignition box but w/ only 9psi you wont need to.

>as
>far as I know there is now way for you to advance your
>timing other than the advancing of your cam gears.

Correct me if Im wrong but ignition timing and cam timing are 2 totally different beasts

1998 dodge avenger 4 cyl AT
Mods are:
Not enough

no, your right they are two different things.

ok so if im boosting 9psi at WOT i should see around 20 advance only? if its more then 20 i should retard timing if needed... but if it's below 20 i should be ok?
thanks



Michael 99gs
HRC Stage 2
http://www.dreamwater.net/purplebeast

Michael
99gs hrc stage 5000 SOLD...
2004 Honda Accord V6 (240 hp)stock
what other car should i buy?? hmmm
Car info & pictures at http://www.cardomain.com/memberpage/520269