#24963, "Cutting front bumper for HRC front mount..."
Anyone have any kind of pictures on where to cut my bumper for the HRC front mount. I have the 95 front, so the HRC instructions aren't helping me. I just thought I'd ask before I start going balistic with the cut off wheel
#24964, "RE: Cutting front bumper for HRC front mount..." In response to Reply # 0
I need to find out also. From what i understand, the fog lights have to go and quite a bit of cutting is necessary. My kit is sitting in my garage just waiting to be installed...
#24965, "RE: Cutting front bumper for HRC front mount..." In response to Reply # 1
If you are talking about the bumper itself you have to cut a long notch out of the bottom of it. The notch has to go down the entire length of the bumper. You have to cut the bumper enough to fit the depth of the IC behind it. Just cut a little at a time and check it so you don't cut to much. If you are talking about the front fascia you have to just shave the whole back of it. I never shaved it completely, I got sick and tired of cutting it and just slapped it on the car. I am going to get a 97+ front bumper to make it look more clean. Hope this helps you out some how. Patrick
Patrick 96 GS 13.54 @ 106.94 mph on 15psi 21 May.04 HRC kit, S20G, FMIC, Howell bottom end 8.6 pistons, S-FMU, Blitz BOV, P&P head, SS valves, lots more little goodies
Search
Printer-friendly copy
0 Users in Chat
and quite a bit of cutting is necessary. My kit is sitting in my garage just waiting to be installed...