Well for all of you that doubted my flexible IC piping you were 1/2 right. It didn't bend at all but when I was doing the soapy water test the pipes were bubbling. The freaking air was leaking out of the pipes. That was idling so who knows how much was leaking at 9 psi??? Anyway I replaced all the flexpipe w/ mandral bends. Here is what it looks like now. Anything else look like it needs fixed or altered?

looks real nice, how did the intercooler hook up, because with the other pipes it looked a little awkward

www.artexmusic.com

97' grey gs/Greddy EVO catback/Greddy header/AEM cai/afx udp/dropped on 2" sprints

The IC is wedged in and held in place by the pipes. I also have ties on it just incase. I had 3 90 degree bends and I only had to cut one piece of 3" straight pipe. The rest fit perfectly. I guess I got lucky w/ the in/outlets on the IC.

cool coldair intake also

http://www.hadesomega.info -car specz and movies 95 Eclipse RS | 76' 280Z | 89' MR2 | 99 Neon | 91 Zephyr
Who sez FF can't drift?

about how much total did it cost you for this custom kit, I have a little money, and Id like to turbo, but not sure about custom kits... let me know

~It has been a very sad week for me. I lost to my girlfriends 3g RS. It is auto. Mind you my ignition is out on my #2 coil pack, my second gear synchro is out so I gotta double clutch, my compression is down about half in one of my cylinders, and my MAP s

I have roughly $2100 in the WHOLE thing.

i hope to have a custom kit completed within the end of this month and this is a list of items that i have either purchasd at that price, or have found at that price but have yet to purchase. and i have tried to give you web address's for most of those findings.

14b TURBOCHARGER ebay: $215

1g INTERCOOLER ebay: $58

MANIFOLD alain on this board: $275

FUEL CUT DEFECIENTER: $55
http://www.group5motorsport.com/cgi-bin/GRPstore.cgi?user_action=list&category=Synapse%20Engineering

GAUGES-
Boost, $50-same web site as fuel pressure gauge/or ebay.
A/F, $55-ebay
EGT, $120-ebay
Fuel Pressure $50-ebay/website http://shop.store.yahoo.com/gofast/minul2gaug.html

GUAGE POD tripple pod $55

OIL LINES $50 http://store.summitracing.com/search.asp?page=13&type=bykeyword&part=OIL+LINES&SearchType
there also seems to be someone on dsmtrader.com who is selling oil line sets for turbo jobs on our cars as well so other cars.

OIL LINE FITMENTS summitracing.com

FUEL LINES $30 http://store.summitracing.com/search.asp?page=14&type=bykeyword&part=FUEL+LINE&SearchType

FUEL LINE FITMENTS summitracing.com


other things you youll probably still need, as so do i:

INTAKE (Charge pipes/cone filter/etc.)
BOV
CONNECTORS/CLAMPS/T
FUEL PRESSURE REGULATOR Vortech SFMU
FUEL PUMP Walbro 255lph HI-Pressure (on ebay sometimes).
possibly DOWNPIPE/DUMPPIPE/some sort of exhaust welding job down there haha.
TURBO TIMER

i'm sure there were a few things i forgot.
just start doing searches on this board for all the different fraise's and words ive thrown up above and youll start gettin an idea of what it all amounts too. and hopefully not long after youll start to realize how it is all pretty simple/logical stuff, and then it will be the only thing you think about until its done.

hey aline could you email me please with info on getting a cuztom manifold made from you i need one i am getting a custom kit and need manifold

thanks,

Edgard

jouer@bellsouth.com

DsM Power Soon to be turbo yahhhhhh

Dsmlight

I tried to email you but the email bounced back to me undeliverable

Alain

one of the 2.4 true pionners

you make it sound simple but it is far from that if you don't know how it works.

*Skrilla
"Honest officer, I thought you were trying to race me"
Talon: 1st 2.4L
'97 Prelude
'04 350Z

Originally posted by etx
Good luck man! Project 'STFU Brian your talon is dead meat' should be on it's feet soon!

>and then it will be the
>only thing you think about until its done.

I feel ya on that, bro... my brain is turning into a turbocharger!

I tried to e-mail him too to give him your e-mail address but it bounced back also :/