My fren with a 1g said that I should port out my t3/t4 exhaust side to help the turbo spool up faster, but then I was thinking that since it gets bigger it'll take alot more exhaust to push the blades.

ALvin

Alvin

http://www.cardomain.com/id/96rst

Smoothing the inlet and outlet surfaces fo the turbine housing will help exhaust flow a little, and is just a smart thing to do.

A.D.P.
"...If you do too much, people become dependant. If you do to little, people loose hope. If you do it right, people won't be sure you've done anything at all."
bring it on............

A.D.P.
"...If you do too much, people become dependant. If you do to little, people loose hope. If you do it right, people won't be sure you've done anything at all."
bring it on...........

ExtrudeHone the turbine housing if anything, but don't port it, you'll lose some of the turbine efficiency on the turbo and with a T3/T4 you probably already have a good bit of lag. Read the latest issue of Sport Compact Car, there is a giant section on what to do and what not to do to your turbos. Good luck

Luke

1998 Mustang GT 5-speed
2002 Lone Star Shelby Cobra Replica