#23755, "Installing DIS 2 Soon. What else do I need?? Questions inside"
Ok I have the dis 2 dual channel ignition. The one with the dip switches. What else do I need other than the ignition itself. I have heard about people needing the tach adapter, but am not sure if this is a must. Also is there anything else. I am also reading the instructions and it says that it will not override the factory settings, for timing, etc. Is the ignition still going to retard the timing. I would like to run 12 psi daily. Will I even need to retard the timing, also should I set the plug gap to a bigger gap. TIA
#23756, "RE: Installing DIS 2 Soon. What else do I need?? Questions inside" In response to Reply # 0
you will need the tach adapter. part nubmer 8912, it's like 40 or 50 bucks. if you do not have this the car will not run. other than that the install is really quite easy. only a few wires to cut and then you are off. It makes a day and night difference after the ignition is in. when i put my programmable dis-2 in it was great. lates james
#23757, "RE: Installing DIS 2 Soon. What else do I need?? Questions inside" In response to Reply # 1
i heard from some people who have the dis2, some dont use the tach but i would since its sopose to boost the signal, and try and keep your cel off. if you get the dis2 (normal) you can retard timing by rpm... its also comes with a carb # hehe =)
Michael 99gs Mods: Hrc Stage 2 S-FMU 315cc injectors Crane HI-6DI2 Greddy Type S Bov VC-2 Road Race Catch Can Greddy Profec B & Switch Apexi WS Catback Super Afc Autometer Boost, electric fuel, Egt, Tranny Temp Gauge & Cooler, Air/Fuel Light & Digital Tokico Adjust Struts Eibach Pro Kit Springs Front & Rear Upper Bar CarCraft Interior Sound System= Bring it On
Michael 99gs hrc stage 5000 SOLD... 2004 Honda Accord V6 (240 hp)stock what other car should i buy?? hmmm Car info & pictures at http://www.cardomain.com/memberpage/520269
#23758, "RE: Installing DIS 2 Soon. What else do I need?? Questions inside" In response to Reply # 2
the tach adapter synchronizes the spark output from the dis-2 ignition. if our cars were singal coil systems like most honda's, then we could run it without the tach adapter. the tech support is real good at msd. they will tell how to arrange the first set of switches so your car will rev past 3 grand. later
2GNT #1865 2006 Yamaha YZF R6 (Blue/Black) 2005 Honda CBR 600 RR (Blue REPSOL) 2003 BMW 325I Premium/Sport Package 2003 Honda CBR 600 RR (sold) 1998 Mitsubishi Eclipse RS (sold) Shuwa's links: http://www.facebook.com/Shuwa29 http://s16.photobucket.com/albums/b50/shuwa29/ DarkOne> but we all have that inner ricer that is just dying to come out sometimes...
#23759, "RE: Installing DIS 2 Soon. What else do I need?? Questions inside" In response to Reply # 3
THE ONLY THING THE "TACH ADAPTER" does on our cars is keep the CEL off. My car runs FINE without the $50 tach adapter and the CEL on. No big deal. Fuck spending $50 to keep a damn light off.
Search
Printer-friendly copy
0 Users in Chat
