do i need all three gauges...egt...a/f...boost...or would i be safe just running a stage 1 with nothing else? also, should i pick up a bov to go with it or is it not needed right away? what else do i need!?!? im strssin ova here...i dont want to not pick up the right acessories with the stage 1 and have my engine blow in 2 minutes. i did a compression check and im at 200.200.200.200. so i guess im good to go. pleaaaaaaase help me out, i need to know the basics of what else to go with the kit. thanx in advance.
Joe
-Joe ___________________________________ White 98 Eclipse GS MT Star Stage 2 *Stolen - 10/24/03*
#22589, "RE: gettin stage 1, what gauges i need?" In response to Reply # 0
Yeah, get the A\F and EGT. Both Stage 1 (HRC or STAR) comes with a boost gauge.
As far as BOV goes, the HRC one comes with a 3000GT which is more than sufficient. The Star stage 1, doesn't come with a BOV though, but don't qoute me on that. Good Luck
Kris "Someday............I'll have traction problems!!!!" Tampa, FL Pinoy Turbo 2GNT
1999 HRC Turbo RS Stage 2 Auto with BOOST!!!!!!!!!!!!
#22590, "RE: gettin stage 1, what gauges i need?" In response to Reply # 0
If you're getting the HRC kit, a boost guage comes with it. I also picked up the jumptronix A/F and autometer EGT with the probe.
I've been running around with Stage I for about 4,000 miles or so with no problems. My only advice of something you should upgrade it (if you're getting the HRC) is a vortech S-FMU. The Cartech that comes with the kit sucks major ass. I have to keep adjusting my idle pressure pretty much everytime I start the car. :/
You may want to get a guage pod too if you dont already have one. I got the cool instument bezel one. Looks better than a pillar mounted one IMO.
#22592, "RE: gettin stage 1, what gauges i need?" In response to Reply # 0
i will third that comment about the cartech regulator. i met up with a friend who just got finished with his install YESTERDAY and the damn cartech was fluctuating 10-20 psi even with it being brand new. i love my s-fmu
#22593, "RE: gettin stage 1, what gauges i need?" In response to Reply # 4
thanks for the advise. im getting the star kit, so i wont have to worry about the fpr, but i know the star kit has no bov, should i invest in one, or not needed with that low amount of boost? also with the star kit and no boost controller the wastegate will be set at 5psi right, or is it lower?
-Joe ___________________________________ White 98 Eclipse GS MT Star Stage 2 *Stolen - 10/24/03*
____________________________________ 2gnt Member # 333
10 MB C300- Family Car 07 MB CLK350 - Daily Driver 03 Evo VIII GSR - 569hp Daily Driver 04 Evo VIII RS - Weekend Warrior (sold) 95 TSI AWD-500+hp- sold (huge mistake)) 95 Eclipse (First NYC turbo'd 420a) sold 6 other dsms sold or parted out.
CornBread Racing R.I.P Shane aka Cornbread. Racing will never be the same with out you brother.
#22595, "RE: gettin stage 1, what gauges i need?" In response to Reply # 6
Star stage 1 comes with HKS std bov. It does not come with a boost gage.
I would call to confirm the bov. There are some places that allow you to eliminate that and order something else.
The HKS standard bov is fine. You also need(to be safe and monitor your car)a boost gage and egt gage with probe. To back up your egt readings, a digital A/F gage is a good choice as well.
I have the gage dash bezel from autometer. I do suggest buying a 0-20 psi boost with vacum gage. This will allow you to see each psi more easily (20 is more than enough for most of us) and the vacum allows you to see if you have any leaks in the system. It allows you to monitor driving in vacum more easily and not getting into boost unless you want to.
97 RS(PTE SC-61, Built Long Block, Electromotive Tec 3)It's Here!
Search
Printer-friendly copy
0 Users in Chat
