#22369, "where to mount ignition in bay or inside car?"
right now i got the crane hi-6di2 and i got it mounted next to the late ecu 99 tight fit... i notice it gets super hot under the hood, and when i touch the crane ignition its burning hot.. should i transfer it inside the car? or will it be ok under the hood? any effects?
Michael 99gs Mods: Hrc Stage 2 S-FMU 315cc injectors Crane HI-6DI2 Greddy Type S Bov VC-2 Road Race Catch Can Greddy Profec B & Switch Apexi WS Catback Super Afc Autometer Boost, Egt,Tranny Temp Gauge & Cooler Air/Fuel Light & Digital Tokico Adjust Struts Eibach Pro Kit Springs Front & Rear Upper Bar CarCraft Interior Sound System= Bring it On
Michael 99gs hrc stage 5000 SOLD... 2004 Honda Accord V6 (240 hp)stock what other car should i buy?? hmmm Car info & pictures at http://www.cardomain.com/memberpage/520269
#22370, "RE: where to mount ignition in bay or inside car?" In response to Reply # 0
Hey Michael, When I put mine in (BTW thanks for the help) I put it directly under the fuse box. I took the fuse box out and removed the air piping that was left in there and the ignition fits nicely. That allows air to flow across it (from stock intake piping locations) and there is air flowing underneath it. I've checked it several times for heat and I've never even felt it to be hot at all.
#22371, "RE: where to mount ignition in bay or inside car?" In response to Reply # 1
no prob dude... if u can post some pixs for me so i can take a look that would help... i got my single tach adapter under the fuse box next to the piping tight fit there also.. im a bit scared of how hot it gets...
Michael 99gs Mods: Hrc Stage 2 S-FMU 315cc injectors Crane HI-6DI2 Greddy Type S Bov VC-2 Road Race Catch Can Greddy Profec B & Switch Apexi WS Catback Super Afc Autometer Boost, Egt,Tranny Temp Gauge & Cooler Air/Fuel Light & Digital Tokico Adjust Struts Eibach Pro Kit Springs Front & Rear Upper Bar CarCraft Interior Sound System= Bring it On
Michael 99gs hrc stage 5000 SOLD... 2004 Honda Accord V6 (240 hp)stock what other car should i buy?? hmmm Car info & pictures at http://www.cardomain.com/memberpage/520269
#22374, "RE: where to mount ignition in bay or inside car?" In response to Reply # 4
hey dude, thanks for some pixs.. but the location under the fuse box how can u mount it there? dont you have the piping from the tb to the elblow under there? or did u mount it on top of that pipe? how did u secure it in that location?when i removed my fuse box yesterday to look around i did not see enough room to place it there?
Michael 99gs Mods: Hrc Stage 2 S-FMU 315cc injectors Crane HI-6DI2 Greddy Type S Bov VC-2 Road Race Catch Can Greddy Profec B & Switch Apexi WS Catback Super Afc Autometer Boost, Egt,Tranny Temp Gauge & Cooler Air/Fuel Light & Digital Tokico Adjust Struts Eibach Pro Kit Springs Front & Rear Upper Bar CarCraft Interior Sound System= Bring it On
Michael 99gs hrc stage 5000 SOLD... 2004 Honda Accord V6 (240 hp)stock what other car should i buy?? hmmm Car info & pictures at http://www.cardomain.com/memberpage/520269
#22375, "RE: where to mount ignition in bay or inside car?" In response to Reply # 5
You have to unbolt all the screws that hold the fuse box, and the sheet metal frame. Remove that metal framing that the fuse box bolts to. On the round hole opening (where the stock intake piping went throug), I placed the Crane ignition on it and mark the mounting hole. Drill a small hole (to go with the screw size you plan to use), and use a sheet metal tapping screw to secure the Crane ignition to the metal frame--with the harness side pointing toward the ecu. Then slide the frame back under the fuse box and secure all the bolts.
___________ Kon C
"Sometimes, a man has to do what a man has to do."
#22376, "RE: where to mount ignition in bay or inside car?" In response to Reply # 6
hey dude, i got it..right now i got my profec b motor in that spot as well as my road race catch can...do u have the profec b? if so where did u mount the motor? i might just mount it in the car since its so hot under the hood, and when i touch my profec b motor in the same location it was hot as hell... is it true if the ignition gets to hot it could be a fire problem? thanks dude
Michael 99gs Mods: Hrc Stage 2 S-FMU 315cc injectors Crane HI-6DI2 Greddy Type S Bov VC-2 Road Race Catch Can Greddy Profec B & Switch Apexi WS Catback Super Afc Autometer Boost, Egt,Tranny Temp Gauge & Cooler Air/Fuel Light & Digital Tokico Adjust Struts Eibach Pro Kit Springs Front & Rear Upper Bar CarCraft Interior Sound System= Bring it On
Michael 99gs hrc stage 5000 SOLD... 2004 Honda Accord V6 (240 hp)stock what other car should i buy?? hmmm Car info & pictures at http://www.cardomain.com/memberpage/520269
#22377, "RE: where to mount ignition in bay or inside car?" In response to Reply # 7
Id personally mount it on the side of the fuse box or around that area. You would get better ventilation I could see it melting the bottem of your fuse box if it gets to hot. BTW, nice catch can,lol
Search
Printer-friendly copy
1 User in Chat
