well i got my 500cc in today from HRC...also got my turbo XS dual stage MBC also....
installed the MBC and turned down my wastegate to about 7psi and it seems faster than it did at 10psi. maybe cause the MBC is letting it spool faster, but i do have the MBC turned all the way down so would it still have this effect? or maybe at 7psi the fuel is setup better than at 10psi. i'll use the first stage of the MBC at about 10psi then 2nd at about 15psi+
just waiting for my 3:1 FMU disc (i returned the recal kit) and to install my injectors and i'll be set.
97 RS Star III(E) @15psi JE pistons Crower Rods CF dual friction clutch Apexi RS exhaust race pipe (no cat) B&M short shifter HRC 500cc injectors Vortech 3:1 FMU Apexi S-AFC TurboXS Dual stage MBC fiberglass hood (with vents over turbo and inta
#22162, "RE: got my injectors and other stuff" In response to Reply # 0
The small adjustment(bleed screw) that you have to set per the instructions is suppose to help build boost sooner(lower rpm), besides increasing/decreasing boost in small increments.
97 RS(PTE SC-61, Built Long Block, Electromotive Tec 3)It's Here!
Search
Printer-friendly copy
1 User in Chat
