my boost gauge is hooked up pretty shotty, what kind of a fitting am i looking for to take the plastic sender line and hook it up to a vac tee or to the manifold? right now the sender line is just shoved into the vac "t" hole, its a tight fit and doesnt seem to leak, but i'd like to do it the right way. tia

If it is hooked into a vacuum line via a "T" fitting, it is hooked up correctly. Vacuum is vacuum as long as the source is good.

Yeah, I know it works and all, but there has got to be a better way rather than shoving the plastic line into the vaccume 't', they're meant for vac hose going over them, not a plastic tube sticking in thr hole, i guess i could superglue it in there to make sure it doesnt come loose, but you guys have to be doing something else? I couldnt find any brass fittings that would get me anywhere at autozone..

Come to think of it, I rigged mine too and I'd like to fix it. Maybe that's where I'm getting leaks... I hose clamped a small silicon line on the plastic boost gauge line. Then put the silicon line onto the plastic T. If you end up gluing it, use epoxy, not superglue.

I'll keep looking, but I don't have any ideas right now. If you find something, let me know and I'll do the same.

Matt

99GS MT | Star Stage 2 | GC coilovers | HurriganeGS tie bars | Tokico Illuminas | 17x7 Enkei RS5 | Baer track brakes |+

I used the small vacuum line from the EGR system.. the end that goes to the egr acutator will fit nicely over the end of the platic boost gauge tube.

-97 GS (First project, 299 whp)(sold)
- 97 RS 2.6 last numbers: 306hp, 352tq @16psi (Dead, parted out)
- 99 GS OZ, Hahn Kit, 56k miles (Sold)
--------
- 00 Nissan Maxima GLE (Daily Driver)
- 02 Audi A4 1.8T Quattro

You guys hooked it up fine. That is seriously how it is supposed to work

If you really want, you can tap into the intake manifold and mount the fittings that come with the autometer boost gauges. That gives you a direct boost source, but it is such a pain to do. Keeping the "T" fitting is perfectly fine. I am willing to bed 95% of DSMers do it that way. I have seen a LOT of turbo DSMs, and I have never seen it hooked up any other way.