i went to hook up the return line and bolted everything up and turned the center housing like stated, but i don't think the tube that was supplied is bend right. i need to know where the oil return is supposed to run. also need a picture of where to tap oil pan(seems like the air conditioner is in the way)

sorry, i don't have any pics. But, when the turbo is bolted on to the mani, just hold the return tube on the front of the oil pan and aim the end(the one w/out the flange) toward the fitting in the bottom of the turbo. The bolts on the flange should be going up and down(one below the other). You shouldn't have any problems w/ the ac compressor being in the way because the drain should be towards the middle of the oil pan, like closer to the driver's side. Hope this helps some, justin

justin
**1998 RS w/ 5 spd **FOR SALE**
http://www.autotrader.com/findacar/vdetail.jtmpl?car_id=117972723&dealer_id=&make=MIT&distance=25
&max_price=&model=ECLIP&advcd_on=n&end_year=2003&min_price=&certified=n&address
=43947&search_type=used&advanced=n

thanks