I bought the star stage 1 turbo kit, and i have to vaccum tee 3 hoses, like for my blow off valve, my intake, and my fuel presssure riser.....there are a lot of hoses on my intake manifold, but which one do i use? and can i tee all 3 of these into one hose?

i just installed the HRC stage 1...
maybe this will help...on the back left of the intake mani there are 3 hoses comin out...the one on the left is what you T into for the BOV...the one on the right required 2 T's--one ran to my FPR, and the other ran to my boost guage. hope that helps...if not im sure someone with a star kit can help ya

don't 3 off of 1 line there will not be enough pressure to get good readings and your fpr and bov and boos gauge will not function right.
If you have to t off of other lines then t one line of another, then then t one to another and so on. the best thing to do is to tap the manifold and plug the lines directly to it or make some kind of splitter that taps into the manifol (kind of like the ones that are already there, this is what i did).

-97 GS (First project, 299 whp)(sold)
- 97 RS 2.6 last numbers: 306hp, 352tq @16psi (Dead, parted out)
- 99 GS OZ, Hahn Kit, 56k miles (Sold)
--------
- 00 Nissan Maxima GLE (Daily Driver)
- 02 Audi A4 1.8T Quattro