Hey, my Star stage 1 is on the way so i wanna get some help with these before it gets here. I have an autometer Phantom boost gauge (5703), and the APEXi auto timer. Can anyone give me help on installing these. I also have an autometer phantom oil temp gauge, how would i hook this up? Any help would be appreciated. Thanks, Deze
#18778, "RE: Wiring boost guage and turbo timer?" In response to Reply # 0
Well for the timer if you have a harness than that should be easy as hell.
This is courtesy of Spin Daily and Eclipzegst
1. remoce the plastic piece where the hood latch is (3 bolts #12) 2. Remove the bottom piece of the steering column (3 scres) 3. Find the large white ignition plug and disconnect it. Plug the corresponding plug of the TT harness into the key plug. (ooh lotta plugs huh) 4. the other end of the stock plug goes into the other end of the harness 5. orange wire on timer goes to speedometer 6. white one is only for nissan's 7. purple wire goes to e-brake which is a must connect 8. black is ground 10. mount the timer and set your time manually or auto.
For the boost gauge, the hardest part is tapping into a vacuum source, Eclipsegst has a good pic under the 1gen, 4g63 forum
hope that helps
Mick
Shogun Body Kit GTR Flared Wing Arospeed Muffler Half red-Clearm Tails QT s-08 18" Toyo Proxes Z4 215/18/35 ..some turbo thingy me and Ray pieced together...
Don't have the stock Eclipse anymore Just a stock Gsr now,
#18780, "RE: Wiring boost guage and turbo timer?" In response to Reply # 2
actually for the turbo timer, it is easier with the harness. Just plug and play. Hard wiring is tricky as you need to make sure the tap you use bites through the covering.
#18784, "attn eclipsekaiser" In response to Reply # 6
so would the harness from the first gen fit i already bought the timer with the 02 sensor/af so i want to hook it up now so what harness should i get? nopi has them for the 1st gen and a few other cars but will the first gen have our same ignition stuff
I edited to the wiki!
Originally posted by DR1665 NOTE TO SELF: Go commando to wedding. Scar the Irishman for life.
#18785, "RE: attn eclipsekaiser" In response to Reply # 7
I just got done hard wiring mine, is the car suppose to stay running? Mine shuts down but the oil light stays on like i have the ignition "ON" without accessories, and when i counts down it shuts off. Is this right?
so will a 1g harness fit our car or would i have to get a 2g turbo harness in order for plug and play? all nopi seems to have is one for a 1g.... what should i do
I edited to the wiki!
Originally posted by DR1665 NOTE TO SELF: Go commando to wedding. Scar the Irishman for life.
Search
Printer-friendly copy
2 Users in Chat
