Hello,
I installed my S-AFC and Blitz Dual TT a couple days ago.. it was pretty easy to do, however my afc has been getting different readings than what my tach shows.. at idle (about 900RPM on the tach), it shows about 5xx RPM on the afc.. and the peak RPMs its read is about 4000 something even when i've just about redlined it.. Is this because I didnt tap the RPM wire weell enough and it's not reading the right voltage? Or is this the true RPms or something? Also, my Airflow reading is around 1-2% at full throttle, then it goes up when i realease the gas pedal, is this normal? Thanks for your help...

Gary

http://www.geocites.com/illfallwithyourknife/afc.html
(pictures)

pictures dont work for me...

AFX/UDP,AEM,AF/X 55mm TB,50 shot of NOS,Glenn's short shifter,17" tantrum,prokit KYB AGX,JL stealthbox sony headunit,audiobahn amp,M3 style mirrors,Blue leds,yellow fogs,reverse ind,w

To fix the RPM's switch the settings to 2 cyl

Really? Why 2 cylinders?

Gary

http://www.geocities.com/illfallwithyourknife/afc.html

That's the correct address for the pictures

-Gary

No idea way, but that's what I had to do with my friends 1G. I think I read it on RRE's site

That is exactly where I put my S-AFC. About the 2-cylinder thing; we have two coils, but you are only taking readings from one. Hence, your RPMs (on the S-AFC) readings from one coil will be half of your actual RPMs (if you were reading from both coils).



Eric Madden

Why not just hook it up to the right waire, and set it on 4cyl like it's supposed to be?

The tach wire is solid white. it's the only solid white wire in the harness - use it.

______________________________
If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.

'95 Eclipse TurboGS (garage deco)
'95 TSi AWD (restoring a survivor)
'97 Talon ESi-T (poor impulse control)
'99 Eclipse RS-T (daily beater)
'13 Evo X (mostly stock)
'17 Sienna (Middle Aged Dad Mobile)



Factory Service Manuals: http://nawdu.de/files/

I figured out what was wrong.. I had it set at 6 cylinders!!! I keep thinking about my ex-car,a '00 eclipse gt... I even have the '99 gs which is maroon registered as a white car which was the color of the '00.. which i have to get fixed soon.
Here's a question though, how come when I reset my ecu, the car runs good, then after a bit of driving the SES comes on and it runs choppy and things like before? Any ideas?

Gary