Hi my names Jared.. I have a 1996 Gs automatic It looks good now but no matter what I do its obvioiusly slow.. so therfore I am goin turbo.. Im staying simple and Cheap.. stock T-25 will do but I have heard so many conflicting storis from People, Mecanics and mitsubishi themselves,.. I think the best is to come to you guys for help.. I NEED TO KNOW A LIST OF EXACTLY EVERYTHING I NEED. I want to convert with out putting strain on my engin. are the 2.0 engins of a gs and a gst the same? or are the valves and pistons and all that stuff bigger or stronger.. ? I also heard thet you cant change the computer to a gst/x computer becuse it is way different and wont run my car.. Is this true? and if so what should I do? is there a chip I can get to upgrade ? so I basicly have those questions and I need a list of the related things I need to convert my car like: intercooler, exhaust manefold ect. thanks alot get back to me!

Hi and welcome..

Most of the info you need can be found searching the forums, but here are the basics..

The 2.0 engines are nothing alike.. the gs-t engine is a mitsubishi and the gs is a chrysler/dodge engine.. no parts are interchangeable

You can upgrade to a turbo, everyone loves theirs, and our engines can handle 8psi of boost, somewhere around 250 hp I believe.. Thats with stock internals.

There are a few people with auto trannies, and they dont seem to have problems either.

For a turbo kit, either go to www.hahnracecraft.com, or www.turbogs.com

The two companies who make kits, STAR and Hahn. Again, for the differences, do a search. People have both kits and love them both.
It will usually cost you from 1800-2400 for a new turbo kit, dependng on which kit and extras.

Nate

thanks for the engin info. actually I have found that just buying everything seperate is cheaper.. I might beable to get everything I need fairly new for around a grand or less.. I just have to find out about these other parts but thanks for the engin info.. screw the turbo engins ours is fine! lol

>thanks for the engin info. actually I have found that just
>buying everything seperate is cheaper.. I might beable to
>get everything I need fairly new for around a grand or
>less.. I just have to find out about these other parts but
>thanks for the engin info.. screw the turbo engins ours is
>fine! lol

Call HRC and see if they can email you a parts list of all the stuff you will need so you know what your getting into before you just start buying stuff that might not be powerful enough or extra stuff ya just dont need.

Robert Parkhurst
toykilla@comcast.net

Hi and Welcome:

to your idea of piecing together your own kit, I've got one thing to say to that, if you have no idea of how a turbo system works or the basics, than I wouldn't suggest it until you read up on it.

Parst list: I will tell you what you need, but you gotta know what they are for and how to use them.


turbo - (get one in GOOD condition or you'll end up getting another one) ... if you get one that's internally gated you won't need an external wastegate.

(tru that, I got a t-25 for about 100 bucks to my house)

IC - it's not neccessary but might as well. Get a decent one for what you plan on doing

(like he said, Don't need it but MAKE SURE what the wastegate on your turbo is set at. Originally I was going to go stage one but I found out at the last minute that the t-25 is set at about 10 lbs. Otherwise my turbo would've only cost me like 900 dollars) I ended up using a Starion intercooler. Picked it up for 60 on thepartstrader and got the welding done on it for 60 more.

manifold - either weld your own custom or try to weld a flange on the stock manifold (might have problems because welding on cast iron)

<dude, this guy is on the ball!! Ok, the situation with this. I had a bad ass tubular manifold, it was *equal lengths* header styled, ONLY problem is....it kept cracking *I think because one of my motor mounts is shot or gone or seomthing, cause my motor moves like a biznitch* but compared to the Star Manifold I have on my car now, It felt a lot faster with the tubular style than the log Star. BTW The t-25 WILL bolt up to the stock manifold on your car right now...... BUT you will not have enough clearance for your downpipe and AC. And he's also right about making an adapter plate for the 4g63 manifold, Cast Iron does not bond well with the other welding.
I got my manifold and downpipe for about 400 skrillaz

bov - if you're only running 4-6psi the hks standard will do ... otherwise get a good one
I gots my 1st gen from Ray, you can pick one up for about 40 bucks if that.


fuel pump - get a walbro or a holley or an inline something or other
Yup I actually had a Accell Inline but it blew up on me (dont' ask)
So I had to next day a Walbro Intank for 100 bucks

fuel pressure regulator - gotta have it
I got the BELL Adjustable FPR, 160 bucks

air filter - for the turbo
Got it, GOOD!

oil return line - feed the turbo it oil (and you have to tap the oil pan)
Go to your local Hydraulic shop and get it done (Bring in your turbo and your t-fitting that goes to the back of your block and tell him you need a steel braided line about 3-4 ft long from that fitting to the turbo), or order it from RRE if you like getting it up your ass
I paid like 70 bucks SHIZ ish expensive

catch can - might as well
I just routed mine back into the filter

gauges - boost, egt, a/f at least
I bought them new at Carparts.com, Paid 120 bucks for two gauges and a tri pillar, I got the boost and the a/f

downpipe - turbo to the cat
Came with my manifold

i/c piping - hook everything up
Pretty damn hard to do without having downtime on your car, I hope you're good with pre-mandrel bent pipes and fabing up the design in your head
I think I paid around 100-200 bucks in piping

misc stuff - silicone connectors, o-rings, flanges, bolts, screws, etc.
This is what kills you.......
Finding that stupid fitting that goes from the fuel rail to the FPR
Finding the fitting that goes from the fuel filter to your stock fuel feed line
Just a bunch of little things that you will have a good time looking for, I actually found all the fittings I needed at the Hydraulic shop..............after I bought it from HRC, at about %25 percent of the price I paid...
Price I paid: Between Silicone hoses and fittings and NEXT DAY air from RRE and HRC, At least 300 bucks

vc1
79 bucks i think


I think that's all the parts, I'm sure I missed something, tell you the truth, RAY did most of the install for me but there were some HARD ass parts that I do remember

Taking the oil pan off and drilling the hole, I'm leaking oil still, Gotta fix that soon
Buying a bendable brake line to use as my feul return, RAY had to route that bad boy under my car all the way from the engine bay to the gas tank....
ETC ETC
BUT, i only paid 1200 in parts..........sooooooo take it as you want to bro....if you gots questions go ahead and ask, I got all my answers and help from Ray, Mario (thunderRS), Jason Esi-T, and Corbin as well as Wheatking......if you're serious...consult these people as well....WHEW!!



Mick

Shogun Body Kit
GTR Flared Wing
Arospeed Muffler
Half red-Clear Tails
QT s-08 18" THEY ARE GONE, I"M REPPING TEAM 14
Toyo Proxes Z4 215/18/35
..some turbo thingy me and Ray pieced together...

Don't have the stock Eclipse anymore
Just a stock Gsr now,

Since you mentioned a catchcan in that. Today was the first time ive driven my car without having nasty ass oil on the wheels when i got home thx to RRE's catchcan. woOt

Robert Parkhurst
toykilla@comcast.net

i have the HRC Stage 1 pull list scanned at:

http://www.asog.net/phantom/pics/hrc

that should help w/ getting ur parts together.

95 Avenger
ATX->MTX Swap
Holset HX40 @ 26 psi

thanks every one!! Ill let you know how it goes I was planning on gettinng greddy cat bak for exhaust and also a boost controoler .. ill tell you what happens and see if I go kit or not
-Jared

and does any one know about the deal with the computer?

You don't have to modify the computer in any way. (Nobody can anyway)
If you are 96 and up, you will require a voltage clamp on your MAP sensor, but that is it and is included in the HRC kit. There are other options out there for voltage clamps, however. Search, and you'll see.

______________________________
If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.

'95 Eclipse TurboGS (garage deco)
'95 TSi AWD (restoring a survivor)
'97 Talon ESi-T (poor impulse control)
'99 Eclipse RS-T (daily beater)
'13 Evo X (mostly stock)
'17 Sienna (Middle Aged Dad Mobile)



Factory Service Manuals: http://nawdu.de/files/

>thanks every one!! Ill let you know how it goes I was
>planning on gettinng greddy cat bak for exhaust and also a
>boost controoler .. ill tell you what happens and see if I
>go kit or not
> -Jared


Ive heard from many people and shops that any greddy exhaust restricts the hell out of your turbo. Infact, I remember someone on here with a custom turbo kit and greddy exhaust. He actually sold the exhaust i believe because the shop that did the work for him told him that it was killing his turbo. thermal or n1 are widely recommended. Or you might as well get a custom exhaust with your custom turbo.

Robert Parkhurst
toykilla@comcast.net

oh man not another one of these posts

http://www.hadesomega.info -car specz and movies 95 Eclipse RS | 76' 280Z | 89' MR2 | 99 Neon | 91 Zephyr
Who sez FF can't drift?

really? I was unaware that greddy did that to your turbo.. tahts kinda messed up cuz they sell a greddy cat bak for turbo eclipses.. what do you sugest then? I dont want a custom one I want one equpied for my car perfectly cuz soemtime customes dont come out liek you plan

ok I think this is what im doing I need your opinions guys
I think I get the most out of my mondy if I go for teh t3/4 kit on sstage 1 this web site turbogs.com, they are saying its everyuthing I need is this true? I can just hand this to my mecanic and ill be good to go?

turbogs.com is handled by wyatt a long time 2gnter and a good guy to hang around with.. call him at www.raceprep.net


96RS ~ full 99GS Special Edit. body conversion, aem cai, greddy header, greddy sp exhaust, afx pulley, B&M SS, magecores & NGKs, S-AFC, A/F and Volt guages, Sparco Torino Seat, illuminas, prokits, ingalls camber, gunmetal GS rims, ST Sways, STBs, lower rear tie bar, Sony Xplode head, Xplode 10 disk, Boston Components, 2 Kenwood amps, 12" MTX sub, a shit load more.


97GSX ~ 18psi~ Ported/Clipped 10 degrees Frank 2 w/47trim, Ported Exh. housing, Tial 40mm External Wastegate with discharge tube, Ported O2 housing, 3" downpipe, 3" Straight Pipe, Apex N1, fake cat, K&N FIPK, Greddy IC Piping, Type S bov, S-AFC, Profec B, Greddy TT, Slimline Fan, RRE Catch Can, Greddy Big FMIC, ND 660s, Walboro 190lph, ACT 2600 w/street disk, clutch SS line, lighten flywheel, removed cruise control line, Greddy EGT, Coolant, Boost Gauges, motor mount inserts, Magnecor & plugs, greddy oil cap, greddy radiator cap, and free mods. To all the haters _|_ tia

The Original 2GNT []D[][]Y[][]D


96 RS


97 GSX

labor is gonna kill ya, prob @ 500-1200 for install so i suggest find some new friends that are good mechanics and do it urself. u'll understand ur car a lot more by doing it this way and if anything goes wrong have a better understanding of what the problem is. -joe

http://www.geocities.com/shogunltw
HOUSTON 2gnt
auto-star stage III 18psi..."hey tranny u still there"??

yea ur right .. maby by the time I get this in a month Ill find some friends in 2gnt in the NY area that knwo what Im doing.. I woulnt kwno how to do it but Im a fast learner All I would have to do is see it once .. ok well ill see whats goin on soon enough. lol Im taking out my student loan for the turbo .. hey its the only time Im going to get an intrets free loan that I dont have to pay back untill 4 years ... might as well take advantage of it..

or u can just fly all of us houston guys up there on u of course and we'll make a road trip out of it =)

http://www.geocities.com/shogunltw
HOUSTON 2gnt
auto-star stage III 18psi..."hey tranny u still there"??

"Liberate Tutemea Ex Infernis"
More pics at www.cyn0sure.homestead.com