Ok...i have a unorthudux racing pulley that i'm selling, the reason i'm selling it is because i had several experienced mechanics that know that if you install a U/D pulley w/ a turbo setup that you won't feel a significant difference. i was like like bummed for buying it 'cause i thought since the pulley is lighter that i will free up more HP due to that it's lighter. so i'm like forget it, i'll sell it and do another upgrade with the engine. anyway, before i sell it...who here has had this installed AFTER a turbo setup and noticed a difference...maybe you could change my mind.
#14046, "RE: Question on The U/D pulley w/ turbo..." In response to Reply # 0
1. it's not going to HURT anything, for sure.
2. It's a lighter, smaller pulley. It DOES free up horsepower, no matter WHAT else is ont he car.
3. Your mechanic is an idiot.
______________________________ If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.
'95 Eclipse TurboGS (garage deco) '95 TSi AWD (restoring a survivor) '97 Talon ESi-T (poor impulse control) '99 Eclipse RS-T (daily beater) '13 Evo X (mostly stock) '17 Sienna (Middle Aged Dad Mobile)
#14047, "RE: Question on The U/D pulley w/ turbo..." In response to Reply # 1
Isnt it along the same lines as a lightened crank or a lightened flywheel? The less weight those rotating parts have, the less power it takes to turn them?
Later
JE Pistons .020 over Eagle Rods TotalSeal Gapless Rings HRC Stage 2 Kit Stage 4 Clutchmasters Phantom grip LSD TurboXS Hp boost controller TurboXS Type H BOV Greddy Turbo Timer OBX 2.5" catback 2.5" Racecat RRE Oil Catchcan w\o PCV Top Fuel UDP PT Cruiser Lifters and Rockers Missing Link MSD Coil pack MSD 8.5mm wires AFX Solid Front mount Tokico Illuminas Tokico Springs Brembo Rotors Ceramic pads 17" Black ADR Dv-8 Rims Clear Corners Aluminum Gauge bezel(15+HP!!!) White Face Gauges
Soon to come.. Black projector headlights Front 97 Eclipse conversion All GO, A little SHOW.....The way it should be
#14048, "RE: Question on The U/D pulley w/ turbo..." In response to Reply # 2
true on the abive statement I have the unorthox ud pulley andlightned flywheel and the crank and all that shit. believe me in the long run everything helps weather its a 20$ bolt on or a 700$ set of rods it all helps. late mike
stage BIG custom mj racing turbo set up, built block.worked head,all tial components, hks evcez,spearco 992,oh yeah and a huge bottle in the trunk last run all turbo 13.8@108 no nos dyno'd at AEBS in Cali with 300+ hp to the wheels
#14049, "RE: Question on The U/D pulley w/ turbo..." In response to Reply # 1
HEHEHHEHE!!!! i knew that guys an idiot!! i figured 'cause he must be jealous that i have more power than him...he's into ford cars so i guess he's like clueless about this. according to him he says he dealt with many cars that have turbo and knows what he's talking about. i should've came to you guys 1st. and besides it makes sense to me according to the law of physics. well i guess i'll give it a try, thanks for the help guys.
#14051, "Here's a quote from CNNP Racing..." In response to Reply # 5
Unorthodox 2nd Gen Ultra-Series Pulley Don't be fooled by the imitators! Unorthodox Racing has many years of extensive research and development to ensure a high quality and durable product. Weighing in at only 1.88 lbs (12 oz lighter than it's predecessor), this 2nd generation pulley is not only superior in quality, but has a unique design allowing for ease of installation and removal with any 3-leg gear puller. Unorthodox Racing Ultra Light Series lightened under-drive pulleys are CNC-machined from lightweight 6061-T6 aluminum. Premium 6061-T6 aluminum billet ensures the consistency of the material's strength and balance. Tolerances are held to within .001", and numerous machining steps are taken to ensure they are the lightest possible design. In addition to fit, finish is just as important and each piece is representative of this. UR pulleys can provide 5-12 HP gains on normally aspirated engines and 8-16 HP on forced induction engines. Gains as high as 37 HP have been realized on modified forced induction engines! Ultra series pulleys are available in black, clear, red and blue anodizing. The Ultra Race pulley for the Neon is now available and provides quick changing of the outer ring for easy switching at the track. A must for any weekend racer! Both single belt race or combination pulleys are available. $211 Click here for Dyno results http://www.cnnpracing.com/ultra_s_r_dyno.htm
_____________________________________ Jason ESi-T
04' BMW 325Ci 91' Nissan 240SX 98' Eagle Talon ESi (sold)
#14052, "RE: Question on The U/D pulley w/ turbo..." In response to Reply # 4
Note: Ford cars and drivers do not like the laws of physics. If it weren't for physics, they would be able to turn and stop. Unfortunately, the Ford designers didn't forsee this.
Dan Green 99'RS (rustang killr)
>HEHEHHEHE!!!! i knew that guys an idiot!! i figured 'cause >he's into ford cars so i guess he's like clueless about this. >and besides it makes sense to me according to the law of physics.
#14053, "RE: Question on The U/D pulley w/ turbo..." In response to Reply # 7
and if u dont belive the rest of the people ... scc dynoed a soch neon and saw 4 - 8 hp .... they said and i quote ... "the udp is a sure way of making hp in all applications n/a turbo or supercharged "
Unorthadox racing pulley Aem short ram intake Apex-i N1 cat-back(2.5) Nakiyama flat black euro tails Black projection headlights Oz m
Search
Printer-friendly copy
3 Users in Chat
