After installing the Crane Hi-6 ignition in my car, I'm now getting a code 0351 and 0352 - Ignition Coil #1 and #2. Car seems to run fine, but as soon as I clear the codes they come right back. I did not install the tach adapters. Will putting these in get rid of the CEL? I heard some cars won't run with them in. Or is the CEL gonna be there no matter what? Thanks guys.
Greg
'19 Genesis G70 3.3t AWD '88 Chrysler Conquest TSI
That is the only purpose of the tach adapters - they get rid of the check engine light. When you remove the harness from the stock coils (as in, install an aftermarket ignition) the resistance the ECu is programmed to see from the coil packs is gone, so it thinks the ignition coils are shorted. The tach adapters just add resistance to the line, so your ecu thinks everything is a-okay.
______________________________ If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.
'95 Eclipse TurboGS (garage deco) '95 TSi AWD (restoring a survivor) '97 Talon ESi-T (poor impulse control) '99 Eclipse RS-T (daily beater) '13 Evo X (mostly stock) '17 Sienna (Middle Aged Dad Mobile)
Search
Printer-friendly copy
3 Users in Chat
