I have seen alot of posts stating that people want to beable to run 10psi, 15psi, ect. What exactly to you mean by this? I know psi stands for pressure per square inch but what does that have to do with the engine? Thanks

99GSX Auto 14b@17psi 13.345@102mph

That is the Pounds per square inch of air pressure that the turbo makes in the intake manifold to make power. On a N/A motor the car sitting at idle has vaccuum in the intake manifold and piping. When you are at full throttle on a N/A motor, the air pressure is at 0 psi meaning no vaccuum and no positive pressure over the normal atmosphereic pressure. When you have turbo and you give it gas the turbo spins and makes positive pressure and you have air under pressure also known as boost.



current status unknown

http://hometown.aol.com/ohshootuhh/

Perf:
KYB AGX Struts
Neuspeed Sport Springs
5 Strut Bars (2 F/U, F/L, R/U, R/L)
Sprint Front Camber Kit
$15 Rear Camber Kit
Corbin's A/F Gauge
MSD DIS-2 Ignition System
Some Regrind Cams that need High Compression (which I don't have)
Ported Intake Manifold
Ported Throttle Body
Drop in K&N Filter and open airbox
Custom 2 1/2 inch exhaust with Dual DTM Muffler
Empty Catalytic Convertor
Energy Suspension Motor Mount inserts
Hurricane_GS Short Shifter
Symborsky Shift Kit
Clutchmasters Stage 3 Modular
225/50/16inch Wheels and Tires


Audio:
Alpine CD Head Unit
Alpine Flex4 25W X 4 for Fronts and Rears
Alpine V-12 450W X 1 for Subs
Infinity Reference Series 5 1/4 and 1 inch tweeter component systems for fronts and rears
Blaupunkt 3 way 6x9's in the rears
3 MTX 5000 10" 12 ohm subs running 4 ohms mono

Flame Red SRT-4 GT40,8.5:1 Built Shortblock, Brian Crower Stage 2 Cams, etc etc etc...

Couldnt have said it better.

Robert Parkhurst
toykilla@comcast.net