Ok the blow by that I was getting before went into my intake track cause that is how we had it plumbed. Now I know that I have oil in the air filter and I also know that I probably ave oil in the intercooler. I was wondering what is the best way to 1) clean the airfilter and 2) clean the intercooler. I know that there have been post about the intercooler before but I couldnt find them. I think it was Brad that had the same problem. What did you finally decide bro? Any help would be greatly apprieciated.

Thanks,
Thomas.

99 GS
Star Stage II
T04E 57 series
Apexi S-AFC
Apexi AVC-R (set to 0.4 kg/cm2 low --> 0.6 hi)
APEXi EL EGT, Autometer A/F
APEXi TT
APEXi N1 Exhaust

99 GS Sport Package
Star stage II Turbo Kit
T3/T04 turbo w/ e-trim and 57 series compressor wheel
HKS SSBOV
APEXi S-AFC
APEXi AVC-R
Corbin A/F
APEXi EGT, Boost, Oil Pressure
APEXi N1 Exhaust
Grouncontrols, Konis, RH C3's

to clean the insie of the intercooler, I'd rinse it through with gasoline or ethanol, neither will not adversely affect combustion if there is any remaining liquid

"Keep on charging the enemy, so long as there is life."

Todd Scungio
98 RS
15.589 @ 88.22 MPH
2001 DSM Shootout Winner - NT Class

Modifications: GS-T muffler, Iceman cold air intake, AFX underdrive pulley, Brospeed header, Apexi Super AFC, Extrude Honed intake manifold, KYB AGX shocks, Powerslot front rotors, Porterfield R4S front brake pads, and occationally Mazda RX-7 rims with 225/50VR16 Michelin Pilot SX-GT tires

"Tutto fa brodo."

Todd Scungio
98 RS
15.173 @ 90.70 MPH

And also a 2011 Ralliart

I think that was what was suggested to Brad as well, I just wasnt sure thanks. What about the air filter? K&N filter charger kit?

99 GS
Star Stage II
T04E 57 series
Apexi S-AFC
Apexi AVC-R (set to 0.4 kg/cm2 low --> 0.6 hi)
APEXi EL EGT, Autometer A/F
APEXi TT
APEXi N1 Exhaust

99 GS Sport Package
Star stage II Turbo Kit
T3/T04 turbo w/ e-trim and 57 series compressor wheel
HKS SSBOV
APEXi S-AFC
APEXi AVC-R
Corbin A/F
APEXi EGT, Boost, Oil Pressure
APEXi N1 Exhaust
Grouncontrols, Konis, RH C3's

Yeah just get one of those kits. Last time we cleaned an intercooler we just used gas also.

------------------------------------------------
98 ESi
95 GS

Yep before I put mine on I rinsed it out with gas.

DAVE_FL
97 T-GS
HRC stage 2

Orlando DSM www.orl.dsm.org
DAVE99@cfl.rr.com

gasoline here too.

Chris Dishmon
chrisdishmon@hotmail.com or
chrisdishmon@yahoo.com (pretty original, huh?)

http://www.threebrain.com/weeeeee.html

1990 GSX (14.1 in the 1/4 mile, so far)
1997 RS (it just looks neat)
http://www.homestead.com/klipzracer/index.html

LAST EDITED ON 30-Oct-01 AT 07:33 PM (PST)

Shit, sorry i missed this. I didnt catch it till just now. Yeah, gasoline was suggested. I just took my FMIC out earlier in the week actually cause I am having the end tanks either polished or powdercoated dunno which way I'm going yet, but I cleaned my IC out again for shits and giggles. What I did this time was capped off the IC inlet or outlet whatever, and set that side down and the other side up, then I filled to IC completely with a mixture of about 5 cans of TB cleaner and topped it off with some cans of octane booster that I'll never use again cause octane boost is so horrible on those expensive damn o2 sensors... Anyways, I left it over night and dumped it out the next day, still came out black as hell so I guess I didnt do too good of a job last time, I think I'll do it a few more times, maby with paint thinner this time, until I finally pour it out and its the same color as when it went in, lol. Anything strong chemicals like that would probably work I suppose, but gas, alcohol, octane booster, paint thinner, throttle body cleaner, etc... come to mind.


--
Brad Rickard
98 GS HRC Stage V (nuff said)

OT - what FMIC is that?


http://www.asog.net/phantom/

95 Avenger
ATX->MTX Swap
Holset HX40 @ 26 psi

Apexi
--
Brad Rickard
98 GS HRC Stage V (nuff said)