how did you mount your profecB? i've got a profecB and greddy TT and i'd like to mount them where you have yours, but how did you secure them in place so they don't fall back into the area under the stearo?
#11738, "RE: attn super20g" In response to Reply # 1
I have mine similar to his where it is cut into the plastic next to the shifter. I think there might be a VFAQ for this at vfaq.com. I can tell you the only thing supporting mine is the tight fit and some electrical tape I used in the back to help in case it needed extra support
#11739, "RE: attn super20g" In response to Reply # 2
Yeah, only thing holding it in there is a nice tight fit, make sure you cut it too small, then work out till its just right cause you only get 1 shot at it.... BTW, even with a tight fit, I used a hotglue gun to caulk around it pretty thick... It is in there good and tight, never had a prob. Plus that is a great location, easy to get through the firewall back there and run the vaccume lines and stuff.. and for the turbo timer, you can tap off of a lot of your stereo wires and stuff... It worked out pretty good.
Search
Printer-friendly copy
0 Users in Chat
BTW, even with a tight fit, I used a hotglue gun to caulk around it pretty thick... It is in there good and tight, never had a prob. Plus that is a great location, easy to get through the firewall back there and run the vaccume lines and stuff.. and for the turbo timer, you can tap off of a lot of your stereo wires and stuff... It worked out pretty good.
