Welcome to the 2GNT Forum!
Home Site Background Info & Specs Mods & Tech Info CAPS Part Reviews Donate 2GNT Stickers
Search Printer-friendly copy 3 Users in Chat
Top 2GNT Technical Turbo/Nitrous Tech topic #11510
View in linear mode

Subject: "exhaust leak...can it cause these kind of problems? long" Previous topic | Next topic
toykillaDec-01-01 04:08 PM
Old School 2GNTer
881 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#11510, "exhaust leak...can it cause these kind of problems? long"




          

I was driving a couple days ago and all of a sudden the car just went completely lean and surged on me. I checked all my gauges and everything was normal..floored it to check my fcd and it was at 4.6xxx volts. so all that was normal. it also, at idle when i was sitting at a light the car started to die on me and i looked at vacuum and it was at 0. i just thought i had a vacuum leak but when i hit the gas to keep it from dying, vacuum went normal again. i was stumped. When i got home i got out of my car normally and of course my turbo timer kept it running. As I walked in front of my car I noticed it was rumbling like a v8. I popped the hood and 2 of the 3 bolts were gone. The bolts that keep my downpipe connected to the turbocharger. A massive exhaust leak. I ordered the gasket from HRC again (2nd time this has happened - even with locktight). I will fix the problem on Monday when I get the stuff but could the exhaust leak have caused the problems I was experiencing?? I hope so because I dont have the time to fix anything big right now or to take shit apart and check everything out. One more thing is when I go into gear and let off the clutch to move I hear a noise. It only happens when I start the car, put it in drive and when im coasting and put my foot back on the gas. whether im flooring it or easily. It kinda sounds like the transmission gears to me but im not sure. Could it be the cb boot that our cars had a recall on?? thanks

Robert Parkhurst
toykilla@comcast.net

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

Replies to this topic

Super20GDec-01-01 11:58 PM
Old School 2GNTer
2545 posts,
Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#11511, "RE: exhaust leak...can it cause these kind of problems? long"
In response to Reply # 0


          

Exhaust leaks will cause boost probs... I always have some kind of exhaust leak somewhere, seems like I can never get rid of em all.... If its after the turbo then I wouldnt think it would cause too much of a prob cause it should just be loud and annoying, and less restrictive than your stock exuast actually... I tried ordering hahn's gasket but they sent me the wrong part number, so I shipped it back to them and by this time i have payed more money in shipping than in the gasket... and as of a month of waiting, I have gotten no refund or anything.. Kinda upsetting me seeing as how I have a little bit of HRC product on my car... If you dont want to wait for Hahn, just get header collector gaskets(the pro series) from autozone or pepboys... You can get the exact one you need, same size, works just as good as stock... As for your vaccume, whats your vaccume normally? Mine is 7.3 @ idle I believe.

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

    
SemperboostDec-02-01 01:53 AM
Old School 2GNTer
1072 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#11512, "RE: WHOA!"
In response to Reply # 1


          

7.3 in Hg is real real low. Stock idle should be at 18 in Hg. With a turbo it should be a little less. Mines at 15. Check for line leaks.

Alvin

Alvin

http://www.cardomain.com/id/96rst

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

        
toykillaDec-02-01 09:02 AM
Old School 2GNTer
881 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#11513, "RE: WHOA!"
In response to Reply # 2




          

yea...my vacuum is normally around 15-17. Im not getting any boost problems..

Robert Parkhurst
toykilla@comcast.net

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

            
Super20GDec-02-01 01:36 PM
Old School 2GNTer
2545 posts,
Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#11514, "RE: WHOA!"
In response to Reply # 3


          

Well, I have the car back together now, and I am ready to start her for the 1st time in almost 1/2 a year... All the fluids have been drained and refilled.. What should I do to prep the engine before starting? I know that must be hell on the engine to start without circulating the fluids.... Should I pull off the plug wires and pull out the fuel pump fuse and let it turn over till I build up some oil pressure and get her juices flowing before I start it?

Then I'll check my reading on the vac at idle, I believe in the dfi it read -7.3psi at idle.. I'll have to check that when I start her up..

BTW, when I got that reading I had leaks from my NOS fogger setup that is installed on my manifold... I did uninstall it and sealed the threads with teflon paste before I reinstalle, and havent retested yet... BTW, does anyone know what size and what thread type I am looking for to plug off the holes for the nos fogger setup? I am gonna list the kit on ebay this week and need to block off my stock manifold for now until I get Ray to make my one of his intakes.

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

                
toykillaDec-02-01 11:40 PM
Old School 2GNTer
881 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#11515, "RE: WHOA!"
In response to Reply # 4




          

I have no idea about the NOS ports but since the car has been sitting for a year it might be a good idea to crank it a couple times. That will get the fuel and oil as well. Once you start getting pressure on your oil gauge, then start it. (Assuming you have one) Hopfully it will start. LISTEN VERY VERY VERY cafully for detonation. A local shop here spent $20,000 on some engine for there race civic and it blew the first day they started it. The sad part is they have bought 2 more since then and blown both. I guess they sould learn to put an engine together before they start fuxing with one. lol The Quality Tire civic, if any of you were at NOPI NATIONALS. I believe they put the engine in because with the type-R engine they were a second off the pace. Good LUCK super...I look forward to dynos

Robert Parkhurst
toykilla@comcast.net

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

Top 2GNT Technical Turbo/Nitrous Tech topic #11510 Previous topic | Next topic
Powered by DCForum+ Version 2.2
Copyright 1997-2005 DCScripts.com, Copyright 2005-2026 2gnt.com
Generated in 0.062 seconds, executing 24 queries.