Just trying to get some info on what setups are good ... I found one I really like it's a one sided intercooler (inlet & outlet on the same side). I want something that fills up the hole in the front bumper and has the ends on the same side.. But I don't want something huge that will prevent airflow to the radiator and engine bay...

here's a link to the one I like :http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=350286644836&viewitem=&sspagename=STRK:MEWAX:IT#ht_4578wt_939


Please give some feedback...

Status- Need to do break-in...



Try not to challenge me, I'd rather tie up than lose. Either way you NEVER WIN.... - Me..

Hahn FMIC. Bolt on affair.

---

2012 2500HD LML

that eBay one is HUGE... unless you're at like 600 hp it's gonna slow you down.

/>

'95 GS w/ t3/t4b
FMIC, diy piping & RFL BOV
MS2-Extra Fuel&Spark
50 lb/hr Holley injectors w/ 1:1 RRFPR
JE 8.8:1 dish w/ Hastings Rings
Eagle Rods w/ ARP bolts
ARP Head studs
Mild port/polish head
3" custom DP/cat section, 3" PIT catback
dual MBC - 12 psi / 20psi

Just a hint, Ur is a place in the middle east. Your, is a refrence to posession of a person, IE: Your opinion.

Erik P.
Official 2GNT thread Hijacker
Some say that he's driven over more Covenant than he's shot, and that his grenades aren't where you'd expect them to be...
All we know is, He's not The Stig... But he is The Stig's Spartan cousin!

Agreed with Dave. Try to get your hands on the Hahn FMIC. Its an awesome piece and bolts right up. Both the inlet and outlet are on the same side and it is designed specifically to reduce the airflow loss to the radiator.

1999 Eclipse GS
Built motor
Hahn 16G Turbo w/ FMIC
Hahn Stage 5 Portfueler (270's & 500's)
Zeitronix Zt-2 wideband w/ 3.5bar MAP
3" SS Turbo Back
CM Stage 4 Clutch and Fidanza Flywheel
Baer Big Brake Kit

I agree with the couple of posts before me, the Hahn IC is one of the best options for our cars, not to mention it lets you keep your fog lights!! I have seen them go for really cheap lately, just look around.

I wish I had blown it, believe me, I do...

Ditto on the Hahn:
It fits perfect, bolts in to existing holes on the chassis.

2gnt: '99 RS-T, killed by a toyota, pending rebuild...
Daily: Volt
Daily #2: '99 EVG ebike- STOLEN by PEDRO

i like my $80 ebay bar n' plate 24x12x3 IC

___________________________________________



http://www.2gnt.com/quote_db.php?id=278

Outside of Corona: "That sucks, peace out..." (jamie walks away)... "Sweeet, what we doin?" -Zac
Tim's garage (prior to motor install): "Im gonna smoke real quick, that way if you fuck up I am already nicotined up" -Tim

thanxs for the input ! let's see if I find a hanh fmic soon that's in my budget..

Status- Need to do break-in...



Try not to challenge me, I'd rather tie up than lose. Either way you NEVER WIN.... - Me..

Idk if ur still looking but there's a compaNy called project godspeed. They make excellent quality bar and plate intercoolers and piping. Nothing specific for our cars but if your a do it yourselfer they're great.

95 RS sold...