#107140, "SFMU disc/ring combo for 550's" Sep-10-09 06:46 PM by Nightfall
I have a set of RC Engineering 550's I'd like to go ahead and install, but I can't find which combo to use. I found a couple posts of people running them with the SFMU but no info on the discs they used or what psi to set them at. I do have a SAFC to lean them out if needed.
Hahn Stg 2/SFMU 8psi(going up to 10psi once I finish the Greddy boost controller wiring)which I'm well aware is a risk on stock internals lol. Also installing a ported/bored IM/ MP 60mm tb and high flow fuel rail. The MS and Aero 1:1 will go in sometime next month(need to order more fittings)
#107141, "RE: SFMU disc/ring combo for 550's" In response to Reply # 0
Stock internals at 10lbs = blown ringlands. I should show you a pic of the ones I pulled out of my boosted 420a on stock internals. But if you want to rebuild soon then go ahead. just my 2c.
I CONTRIBUTED TO THE WIKI! ah... turbo. I love the turbo, the boost, the speed, the sound. and its all better when you do it yourself. cheaper too.
#107143, "RE: SFMU disc/ring combo for 550's" In response to Reply # 1 Sep-10-09 08:00 PM by eclipse982nrRST
Originally posted by eclipserstturbo Stock internals at 10lbs = blown ringlands. I should show you a pic of the ones I pulled out of my boosted 420a on stock internals. But if you want to rebuild soon then go ahead. just my 2c.
Many members here have ran 10psi for years on stock internals.
#107144, "RE: SFMU disc/ring combo for 550's" In response to Reply # 3
Originally posted by eclipse982nrRST
Originally posted by eclipserstturbo Stock internals at 10lbs = blown ringlands. I should show you a pic of the ones I pulled out of my boosted 420a on stock internals. But if you want to rebuild soon then go ahead. just my 2c.
Many members here have ran 10psi for years on stock internals.
Outside of Corona: "That sucks, peace out..." (jamie walks away)... "Sweeet, what we doin?" -Zac Tim's garage (prior to motor install): "Im gonna smoke real quick, that way if you fuck up I am already nicotined up" -Tim
#107146, "RE: SFMU disc/ring combo for 550's" In response to Reply # 4
Im hoping you have a wideband o2. I have never ran 550s, but I ran 440s for almost a year before upgrading to MS. I was running the 3rd largest disc and idle pressure was set around 20-25psi. You should try running the smallest disk or maybe the next to smallest disc. Set idle to around 15psi and pull the rest of the fuel out with the SAFC. You dont want to lower your idle pressure any lower or the fuel wont atomize correctly.
Use the S-AFC sparingly. Try to do everything with the rings and disks in the S-FMU and use the S-AFC for fine tuning. Lowering your MAP sensor output can make the stock ECU advance timing. I was knocking like crazy trying to tune my car with 440's, S-FMU, and S-AFC. I was never happy and got rid of the setup within a few months.
Search
Printer-friendly copy
0 Users in Chat
