This is my first post after lurking for a long time.

I have been building fwd/awd turbo eclipse for 6 years.

I have my own web site where I sell my own parts and recently my wife wanted her 95 2gnt turbo charged so I dove right in.

One thing I found funny was the fuel rail was cored.

I removed the inside core and added an external regulator and was wondering why no one else talked about this (I couldnt find anyone talking about it)

The other interesting thing I am doing is putting an evo8 turbo on the car and have modified the megan evo 8 manifold to fit the 420a.

Here is some of the things I am doing to her car tell me what ya think.

Evo8 16g

K580M885 Wiseco 1995-02 420A - 8.8:1 - .040 Over Bore Forged Pistons

CRS5472N3D Eagle 1995-02 420A Engine H-Beam Connecting Rods - Length 5.472"

64414-2 Stage 3 Crower camshafts - Race, rough idle.

84176 - KIT SINGLE SPRING & TI RETAINERS

MLS head gasket

ARP head studs

ARP mains

255 fuel pump

MSD DIS II

MSD Coil

MSD Wires

-8 fuel lines

Modified Fuel Rail

IMWINNING Fuel computer

IMWINNING Intake Manifold

IMWINING/Meagen turbo manifold

IMWINNING ported head

IMWINNING IC piping

Front mount intercooler

Full exhaust

and much much more.....

here are a few pics.





anyway I just wanted to say hi to you guys/gals

Niiiice. Welcome to 2gnt. You must have an awesome wife.

Jason|1997 Eclipse RS

I contributed to the wiki!

happy p'ple

how 'bout a link to that website?

1995 eclipse, dropped--1981 camaro z28, 360hp

Sounds damn good... good luck getting that turbo + manifold to fit. Is it just me or is the shortblock, intake mani, and thermostat housing pink? If it actually is pink, that is badass lol

yes the total engine is custom painted by me with pink and purple paint and that valve cover is 8 shade cham paint.

I took the megan manifold exhaust plate off and made a cnc plate based off the exhaust mani for the 420a onto it.

I have already hung the turbo on the engine itself and with some minor work it now clears everything on the block just fine.

Yes my wife is awesome this all started with her telling me that she wanted her car to make that sweet sound pshhhhh and this is what I have come up with.

here is my site
www.imwinning.com

here is her car (the main pic is photoshop of what we are doing to the outside.)

http://www.imwinning.com/pinkpixie.htm

here is my car.

http://www.imwinning.com/firstfeature.htm

i saw this turbine thing somewhere that suposedly makes a n.a. sound like a turbo...alot easier if she just wants the 'woosh' sound.

1995 eclipse, dropped--1981 camaro z28, 360hp

"I" couldnt go for that she is to sassy

Originally posted by muscle_mitsu
i saw this turbine thing somewhere that suposedly makes a n.a. sound like a turbo...alot easier if she just wants the 'woosh' sound.

Captain Caveman

96 RS Turbo 11.414 @ 119.62 MSNS, Crower 2 NA cams, BW366, 10.5 comp, UDP, 60mm TB, W/A intercooler, 3.55 tranny 567.9whp 430tq
97 RS NA 13.188 @ 103.87 MSnS powered 12.5 comp, Crower 3's and 219.4whp with 175tq
98 RS DD 12.5 comp on stock ECU, LTH, Crower 2's, Koni, GC, Hypercoil, DG hats
99 OZ 5sp Stocker 15.856 @ 85.97
99 GS stocker auto 17.7@77mph!

wiki home page:http://www.2gnt.com/index.php?d=bullettdsm

_______________________________________


95 Talon ESi-T

the stock fuel rail inlet actually runs all the way to the other end where the stock FPR allows it to flow into the main part of the rail b4 it draines out the return line.

I removed the inlet core and attached an aftermarket regulator on the return line just like it is on my 4g63.

The result is a huge fuel distribution plenum regulated by the external FPR.

(in case your wondering i have been doing custom fab for about 10 years now)

I suggest a revamp of your website. A lot of the pages make my eyes bleed.

btw, what "fuel computer" are you referring to

Sounds cool... I was wondering, why does your car have to safc's?

Originally posted by kain_99gs
I suggest a revamp of your website. A lot of the pages make my eyes bleed. btw, what "fuel computer" are you referring to

Representing the Central Cali chapter of 2GNT!
(I think I'm the only member )

I'm just glad to hear it's your wife's car, otherwise, those are THE GAYEST colors ever. Haha, welcome aboard

I contributed to the Wiki!
EVO IX - just a really expensive boost gauge and a K&N air filter
96 Eclipse RS -awaiting registration and inspection
95 Eclipse GS - parts car
Mods/Profile - http://www.2gnt.com/index.php?d=cs82685

-Xavier-
95 Eclipse RS-T...lost in the frozen tundra

dont lie man . thats your motor . lol j/k

LED tails : Done for now!
99 eclipse rst
cobalt blue met. paint,star stage 2 upgraded t3/t460trim turbo ceramic coated , polished compressor housing, ,optima yellow top, chrome i/c piping ,front mount ntercooler ,apexi turbo timer . zeitronix wb02 ,faze oil ,boost gauge,egt ,bosch 4x plugs,kyb agx struts, pro kit springs.17''adr venomous rims,Falken azenis ,brembo dilled/slotted rotors ,turbo xs bov ,oil catch can,manual shiftknob,autometer pyrometer egt , vortech sfmu,b&m fuel pressure gauge ,accel 310cc injectors ,gasketmatched and polished intake manifold ,58mm throttle body ,no egr,polished turbonetics wastegate,fuel pump rewire,homade fcd and a lot more .LED reverse lights ,sidemarkers and tails .atx to mtx swap . South bend tz clutch . Tons more
http://imageshack.us>


http://www.2gnt.com/index.php?d=boosted60trimrst
My contribution to the wiki
http://www.2gnt.com/index.php?d=crank%20arm%20spindle%20mod%20to%20fit%20power%20panels

Captain Caveman

96 RS Turbo 11.414 @ 119.62 MSNS, Crower 2 NA cams, BW366, 10.5 comp, UDP, 60mm TB, W/A intercooler, 3.55 tranny 567.9whp 430tq
97 RS NA 13.188 @ 103.87 MSnS powered 12.5 comp, Crower 3's and 219.4whp with 175tq
98 RS DD 12.5 comp on stock ECU, LTH, Crower 2's, Koni, GC, Hypercoil, DG hats
99 OZ 5sp Stocker 15.856 @ 85.97
99 GS stocker auto 17.7@77mph!

wiki home page:http://www.2gnt.com/index.php?d=bullettdsm

1st off it is really my wifes car

here is my car

outside


Inside



Engine



MODS:

Bolt On:

Imwinning O2 housing

TiAL 46mm Wastegate (I have a temp XS power one right now until I get another TiAL)

Turbo XS power header

BR Race Downpipe 3" downpipe

3" exhaust (no cat)

K&N filter with dejon intake pipe

Full hard pipes 2.5" both sides of intercooler

spearco front mount 32X13X2.5 w/ 2.5" in/out

780 pte inj.

Venom fuel rail

Steve tech fuel line set up -8 up -8 down

Aeromotive FPR ( with gauge on it)

3" gm maft (blow threw)

Aem True Time gears

Greddy Catch Can with "PCV" removed

Imwinning Intake Manifold


"TURBO"

SBR-GT14 With a TO4E compressor cover 3"inlet, 2" outlet

Compressor side:

• 56"trim" compressor wheel

• 2.41" inducer

• 3.22" exducer

• 65 lb/min airflow

Turbine side:

• 2.16" exducer

• 2.36" major



ENGINE:

Bored 20-over

4g64 crank (stroked 2.3)

Ross forged pistons (full Floating)

Billet titanium rods.

Clevite bearings

3rd Gen. lifters

No balance shafts

Upgraded oil pump

Cometic head gasket

Arp head studs

Arp Rod Studs

Arp Main Studs

Stainless steal 1mm oversized valves

Ferrea valve guides

Ferrea Valve Stem Seals

Crower Springs and Retainers

Full ported and polished head with reshaped domes

HKS 272 int.cam

HKS 272 ex.cam

WET N20 kit (will be direct port when i get around to it)


Transmission :

Galant VR4 input shaft & 1st gear- w/double synchro 1st gear.

TRE-spec double synchro GVR-4 1st gear

Double synchro 2nd gear

Heavy duty 3rd/4th gearset

TRE-spec EVO III steel shift fork w/ Bronze wear pads 1st/2nd forks

TRE-spec EVO III steel shift fork w/ Bronze wear pads 3rd/4th forks

TRE-spec Heavy Duty shift rails-1st/2nd & 3rd/4th

TRE-spec Center differential spool

AWD clutch fork and pivot ball:

Late model throw-out bearing:

Throw-out bearings retaining clip:

Magnetic drain plug for transmissions:

ACT 2600lb w/ 6 Puck Plate


Suspension:

eibach sport kit 1 in drop

kyb gr2 struts

brembo front rotors

brembo rear rotors

Hawk Performance brake pads front

Carbotech Pantherperformance brake pads rear

Braided stainless lines

front stabalizer bar

polyurethane mounts



Cooling:

Fluidyne aluminum racing radiator

Permacool fans

Hard Pipe radiator hoses



MISC.

TurboXS RFL Blow-Off Valve

COP Setup

MSD DIS II

Boost gauge

Air fuel gauge

Pyrometer probe w/ gauge in car

Mechanical fuel pressure gauge

Mechanical oil gauge

N2O bottle gauge in center counsel

GM Maf Translator

LED shift light

Purge kit for the N20 system

New 1995 EPROM ECU

key diver chip stage III

Pocket logger

I am sure I have forgotten something but oh well ....

*shrugs*

time slip



On the manifold it is SS so the tig welding was easy.

I have the s-afc and the a-vcr (not 2 s-afc) I like the dsm link but at the same time i didnt want to spend the money for it when i already could do everything that it does.

As far as my wifes fuel system We have come up with a setup that allows her to use the safc and msd dis II to handle boost all the way to 25 psi. ( there will be no fmu, sfmu, missing link or any such thing in the car and mega squirt is out also, this is a setup that we built and will be marketting soon.)

I contributed to the Wiki!
EVO IX - just a really expensive boost gauge and a K&N air filter
96 Eclipse RS -awaiting registration and inspection
95 Eclipse GS - parts car
Mods/Profile - http://www.2gnt.com/index.php?d=cs82685

will be a few weeks b4 we are ready to start marketting it to the public. So far we are testing it out onf 4 cars and will be testing it on her car when im done building it.

WOW on the 10 time slip! Chirst.

New Car:
2004 350z base, Nismo CAI, pioneer avic-n1 (dvd, cd, navi)



Old Car:
1998 GS with hrc stage 2, HID 6000k conversion kit, AEM UEGO wideband, sfmu, ml, prokits, Greddy warning gauges: egt, boost gauge, and oil pressure, apexi tt, haydans tranny cooler, costum dp, groundwires, dynotune fp gauge. gst muff, turbo spoiler
Boostin since Aug 03.

nothing like driving with the windows down and the music low: i love hearing the turbo spool, swwwhhhttt!!!!

Very interesting! What grabs me more is how did you get a 1.4 launch on a FWD? I don't think I've seen that on any FWD's (DSM'S) yet.

MB

Captain Caveman

96 RS Turbo 11.414 @ 119.62 MSNS, Crower 2 NA cams, BW366, 10.5 comp, UDP, 60mm TB, W/A intercooler, 3.55 tranny 567.9whp 430tq
97 RS NA 13.188 @ 103.87 MSnS powered 12.5 comp, Crower 3's and 219.4whp with 175tq
98 RS DD 12.5 comp on stock ECU, LTH, Crower 2's, Koni, GC, Hypercoil, DG hats
99 OZ 5sp Stocker 15.856 @ 85.97
99 GS stocker auto 17.7@77mph!

wiki home page:http://www.2gnt.com/index.php?d=bullettdsm

Every one has an there own thoughts and thats cool.

Some like my car and some dont but 10.73 is way cooler then 17 anyday of the week in any book.

If you have the go why not work on getting the show too?

Hows that black leather interior treating you?

Captain Caveman

96 RS Turbo 11.414 @ 119.62 MSNS, Crower 2 NA cams, BW366, 10.5 comp, UDP, 60mm TB, W/A intercooler, 3.55 tranny 567.9whp 430tq
97 RS NA 13.188 @ 103.87 MSnS powered 12.5 comp, Crower 3's and 219.4whp with 175tq
98 RS DD 12.5 comp on stock ECU, LTH, Crower 2's, Koni, GC, Hypercoil, DG hats
99 OZ 5sp Stocker 15.856 @ 85.97
99 GS stocker auto 17.7@77mph!

wiki home page:http://www.2gnt.com/index.php?d=bullettdsm

I was reading and was thinking c'mon guys look again and pow someone did...its awd hehe (sorry for the confusion )

I want to hear more on that fuel mods. I will be builing a motor for my car over the winter, I have it pretty much planned out except for the fuel system. More info would be great!

Tom

98 RS 5spd.

The fuel setup we are builing uses the S-afc to control the fuel both in and out of boost.

We are going to use the MSD DIS II to control the timing.

There will be no missing link. mega squirt or stand alone system.

What there will be is a patend pending little black box that we have built.

We have a whole bunch of parts that will be comming up for sale for the 2gnt. ( IMW stutterbox control, IMW soft rev limiters, IMW mini led shift light, IMW electric boost controller,IMW Intake Manifolds (best gains are with turbo but still nice to have on N/A) etc.)

I do not want to step on any ones toes so please let me know what the rules are about selling things on this site.

PS sorry for the delay in my response as we have been moving and things have been hectic to say the least

R U GOING TO BE MAKEING ANY MORE OF THE EXHAUST MANIS FOR THE 2GNT'S

Yes I will be making a few different versions of the manifold as I run Different turbo setups.

All the items we make are for sale on our site or will be soon.