on a 97 RS, is the ECU/PCM the same thing? on the sight for jumptronix the install says the ECU is behind the center kick panel. is this the same thing as the PCM in front of the battery?
also, what color is the o2 sensor wire that i tap into for my AF meter
?
thanks

USED TO HAVE...Everything you wish you had, and then some...

You are somebody special Tim, you matter! - from the admins (but nobody likes you, because your username is just like that other guy's, and you whine a lot)

>on a 97 RS, is the ECU/PCM the same thing? on the sight for
>jumptronix the install says the ECU is behind the center
>kick panel. is this the same thing as the PCM in front of
>the battery?

In the 4G powered models, the ECU is in the dash. Ours is in the engine bay, in front of the battery.

>also, what color is the o2 sensor wire that i tap into for
>my AF meter
>?
>thanks
Thin white wire with a black stripe, same on all 2g year models. Make sure you use a chassis ground, and not just anything you can drive a screw in. Ground matters, because it can affect your voltage readings.

______________________________
If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.

'95 Eclipse TurboGS (garage deco)
'95 TSi AWD (restoring a survivor)
'97 Talon ESi-T (poor impulse control)
'99 Eclipse RS-T (daily beater)
'13 Evo X (mostly stock)
'17 Sienna (Middle Aged Dad Mobile)



Factory Service Manuals: http://nawdu.de/files/

thanks dino, i think i got it. i soldered the connections together and did the ground to the - battery terminal. Volts bounce like all literature says. thanks for the help.
tim

USED TO HAVE...Everything you wish you had, and then some...

You are somebody special Tim, you matter! - from the admins (but nobody likes you, because your username is just like that other guy's, and you whine a lot)