I am sure this has been posted before but i cant find anything on it. But heres my question. I was at the junk yard today and i found a 2g turbo that someone put nitrous on and pretty much exploded the tranny right out of the car. I was curious is there anyway i could take all the turbo parts out of that car and somehow put them on my 420A? If so if someone would be kind enough to give me a list of what parts i would need to take off and how i would do it. Also what parts would i need to buy and an estimated price of this job. I am not familiar with turbos at all so if someone could please help me i would appreciate it. Thanks

SEARCHSEARCHSEARCHSEARCHSEARCHSEARCH
this is the most over-asked question in 2GNT historyyy. but you wouldn't want any parts out of the 2G except maybe the injectors (and that's only if you want to screw around with wiring them up in our car), since the T25 turbo sucks, the manifold doesn't fit, the intercooler is tiny (but I guess it would be alright if you HAD to have an ic) etc

1995 Eagle Talon ESi

The simple answer is, you can't move anything over because everything is different.

However, if you made your own manifold, seriously upgraded your factory fuel system and engine manangement system, and fabricated your own downpipe and intake piping, you could use lift that tiny T25 and that restrictive intercooler and use them. The stock fuel injectors are good too, but they are a tight squeeze into the fuel rail and you will need something other than the stock ECU to control them.

2016 WRX STi Limited (current)
2001 A4 1.8tqms (donated)
1991 GVR4 #1933 (sold)
old.dsmregistry.com/detail.php?carid=218 (dismantled)