Can you change your rev limit with the DFI? If not what computer cal I use to do it. I have a built valvetrain and I want to at least go up to 8000rpm.

Ummm, the DFI can't over-ride the factory ECU, so I think you would have to have your factory ECU re-programmed first.
--
Brad Rickard
98 GS HRC Stage V (nuff said)

For that, you'll need a Haltech. It replaces the factory ECU and is a fully programmable stand alone engine management system.

_____________________________________________
-Dino Yancey
Hello me, it's Me Again!


For Mitsubishi Technical Manuals, INCLUDING the 97-99 electrical and service manuals, click HERE:
http://www.heavenz-not-0verflowing.com/files/
No MP3 for YOU!

______________________________
If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.

'95 Eclipse TurboGS (garage deco)
'95 TSi AWD (restoring a survivor)
'97 Talon ESi-T (poor impulse control)
'99 Eclipse RS-T (daily beater)
'13 Evo X (mostly stock)
'17 Sienna (Middle Aged Dad Mobile)



Factory Service Manuals: http://nawdu.de/files/

I believe the Electromotive TEC-II can do this as well?

"The fastest draw is when the sword never leaves the scabbard,
The strongest way to block, is never to provoke a blow,
And the cleanest cut is the one withheld."

Michael J. Kulaga e-mail: Michael_97RS@2gntDSM.zzn.com
aol IM: MJKulga Website: http://highlander.dsmpower.com/

All Motor Beast in the Making

Injen CAI, 55mm TB, Hooker 4-1 Stepped Header, GS-T Muffler, AFX UDP, S-AFC, 8.5mm Magnecor Wires, SS Clutch Line, NRG Susp. Motor Mount Ins., FU/RU/RL STBs, TSW Blade 17x7.5, Bridgestone Potenza RE730 215/45ZR-17. Front KVR Cross-Drilled Rotors and Carbon Fiber Pads

To Be Installed: Rear disc brake conversion kit, SS Brake Lines, Rear KVR Cross Drilled Rotors and KVR Carbon Fiber Kevlar Pads

Firefly:
Mal: You don't know me, son, so let me put this to you plainly: If I ever kill you, you'll be awake. You'll be facing me. And you'll be armed.

Acell DFI is a piggy back computer that works with the stock one, You need a stand alone engine managment because no one has figured out how to change the program of our computers. The guys over a ASOG were working with Superchips but they couldn't crack the code.
I was doing some reading and our ECU has all the info "flashed" in to it by Satan. Sometimes the ECU needs to be reprogrammed and Satan will do it by hooking up to the Test port and flashing the new program. I don't know shit about computers BUT someone on the board has to know enough to figure out how to reverse engineer the computer program and change it to what ever specs we want, like higher red line.




http://hometown.aol.com/ohshootuhh/

All Motor Beast in need of MAJOR TUNING

Perf:
KYB AGX Struts
Neuspeed Sport Springs
5 Strut Bars (2 F/U, F/L, R/U, R/L)
Sprint Front Camber Kit
$15 Rear Camber Kit
MSD DIS-2 Ignition System
Some Regrind Cams that need High Compression (which I don't have)
Ported Intake Manifold
Ported Throttle Body
Nameless Cold Air Intake with a K&N Filter
Custom 2 1/2 inch exhaust with Dual DTM Muffler
Empty Catalytic Convertor
Energy Suspension Motor Mount inserts
Hurricane_GS Short Shifter
Symborsky Shift Kit
Clutchmasters Stage 3 Modular
225/50/16inch Wheels and Tires


Audio:
Alpine CD Head Unit
Alpine Flex4 25W X 4 for Fronts and Rears
Alpine V-12 450W X 1 for Subs
Infinity Reference Series 5 1/4 and 1 inch tweeter component systems for fronts and rears
Blaupunkt 3 way 6x9's in the rears
3 MTX 5000 10" 12 ohm subs running 4 ohms mono

Flame Red SRT-4 GT40,8.5:1 Built Shortblock, Brian Crower Stage 2 Cams, etc etc etc...