Hi guys!

here is a vid of the 420a turbo of my friend, the car is a 95 mitsubishi eclipse gs, the setup is..

Garrett t3 internal wg
ebay 420a turbo cast manifold
hks ssqv bov
custom ic piping route (eBay ic piping 2.5")
custom oil return & feed line
crappy downpipe
obx fmu 12:1
oem injectors
autometer a/f ratio
autometer boost gauge
custom gauge pod
walbro 255lph high pressure fuel pump
huge fmic of a caterpillar hahahahaha

the vid:

-----------------------------------
95 Eclipse GS+T.. Garrett t3
MEXICAN DSM 420A TURBO! 1/4 mile: 14.830 @ 6 psi 14.725@100 mph .. 9 psi & open pipe TRACTIONLESS
stock inj, stock mounts, 12:1 vortech fmu, bkr7s at .032", 93 oct, walbro 255, stock clutch.. etc

I HATE SR20DE
http://www.youtube.com/rettez

not bad for a diy kit. get rid of that radiator and get a non turbo one. it will route the upper coolant hose better and avoid heat soaking that hose. That type of hose cant handle the heat that the turbo is going to expose it to.

Add some upper support the the IC. The way its installed will allow it to flex and the lower brackets will break eventually.

Panda racing needs better quality vids....

Tell him to ditch the jdm windsheild sticker.

Though i see a japanese turbo and jdm bov (probably an ebay knockoff like mine) there is really nothing jdm about that car.

Goodnight sweetheart...yes its time to go...bum bum bum bum bum...good night sweetheart yes I am one little a$$hole......bum bum bum bum....

.........................................................................................................................

Built. That's All...
.........................................................................................................................
www.monkeybuttpirate.com
.........................................................................................................................
2 Fingers of Scotch with a milk back... Stat!

i see that most of the installs on theese cars have the turbo setup with the compressor on the drivers side. have you all done this cause thats how it was done before you or did you decide that it would be better for you. i have an rs and having my turbo flipped seems to give me lots of room for ic pipes and a cai.

got that megasquirt!

I seen all your videos nd from what i see it might be a smart investment to get a filter. You might wanna get one before somethin large like a rock puts it on punishment. Hell the dirt is already killing it!!!

-Rafiel

this is not THE mexican turbo manifold
the manifold knowned under that name was made for the chrysler back exhaust engine, had no external wastegate flange and the turbo is facing cylinder 1 no cylinder 4

that's a chinese knock off of the threadstone one

or are you talking about a turbo car made in mexico ????

I'm confused here ha ha

Alain

one of the 2.4 true pionners

mexico rules.

i want something mexican on my car...

-MIKE-

Stroked 2.2L

Your engine is mexican, mike.

Goodnight sweetheart...yes its time to go...bum bum bum bum bum...good night sweetheart yes I am one little a$$hole......bum bum bum bum....

yeah, i did have good luck making a downpipe. it's 2.5" mandrel and under the oil pan opens to a 3" catless. like i said, i like it better. i have a 2.5" cai because there's no ac. comp.

got that megasquirt!

I'm pretty sure they worked on the car in Mexico.

I contributed to the Wiki.